Product Information

LZZ56C

LZZ56C electronic component of Honeywell

Datasheet
Limit Switches BASIC SW ENCLOSED

Manufacturer: Honeywell
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)

1: USD 44.8481 ea
Line Total: USD 44.8481

2 - Global Stock
Ships to you between
Fri. 05 Apr to Thu. 11 Apr
MOQ: 1  Multiples: 1
Pack Size: 1
Availability Price Quantity
2 - Global Stock


Ships to you between Fri. 05 Apr to Thu. 11 Apr

MOQ : 1
Multiples : 1

Stock Image

LZZ56C
Honeywell

1 : USD 45.7406
5 : USD 43.1813
25 : USD 33.4294
50 : USD 31.4081
100 : USD 29.4131
250 : USD 28.1531
500 : USD 27.3787

     
Manufacturer
Product Category
RoHS - XON
Icon ROHS
Illuminated
Lamp Type
Termination Style
Brand
Product Type
Factory Pack Quantity :
Subcategory
LoadingGif

Notes:- Show Stocked Products With Similar Attributes.
Image Description
060-1430-06 electronic component of Honeywell 060-1430-06

SENSOR FORCE LOAD CELL 100LBS
Stock : 0

060-2443-08 electronic component of Honeywell 060-2443-08

Force Sensors & Load Cells SubMini Load Cell Model 13 Force Sens
Stock : 0

060-6827-06 electronic component of Honeywell 060-6827-06

Terminal Block Interface Modules
Stock : 0

060-7472-02-08 electronic component of Honeywell 060-7472-02-08

Honeywell
Stock : 2

060-4637-01 electronic component of Honeywell 060-4637-01

Honeywell
Stock : 1

060-7478-02-01 electronic component of Honeywell 060-7478-02-01

Honeywell
Stock : 1

060-0713-07TJA electronic component of Honeywell 060-0713-07TJA

Industrial Pressure Sensors
Stock : 0

060-0571-04-09 electronic component of Honeywell 060-0571-04-09

Force Sensors & Load Cells
Stock : 1

060-7472-01 electronic component of Honeywell 060-7472-01

Force Sensors & Load Cells Honeywell
Stock : 1

060-3613-02 electronic component of Honeywell 060-3613-02

Linear Displacement Sensors
Stock : 1

Image Description
FM 507 electronic component of Pizzato FM 507

Limit switch; plastic roller Ø22mm; NO + NC; 10A; max500VAC; IP67
Stock : 2

LK-2 electronic component of Promet LK-2

Limit switch; pusher; NO + NC; 16A; max500VAC; max220VDC; IP00
Stock : 2

FR 515 electronic component of Pizzato FR 515

Limit switch; polymer roller Ø11mm; NO + NC; 10A; max500VAC; IP67
Stock : 1

GLAC01A4J electronic component of Honeywell GLAC01A4J

Limit Switches Limit Switch/GL Min Din-GLD,GLC,GLE
Stock : 1

GLLC01A2B electronic component of Honeywell GLLC01A2B

Limit Switches 12Ncm 1.062lbin 10A 1NO 1NC Dir Opening
Stock : 1

GLZ52B electronic component of Honeywell GLZ52B

Limit Switches Side Rotary Adj. Lvr Steel Roller ACTR
Stock : 19

WZLN-2 electronic component of Honeywell WZLN-2

MICRO SWITCH™ LN switches are designed to withstand rapid hammer-blow actuation. Impact on the actuating plunger cannot reach the precision ...
Stock : 1

D4V-8107Z electronic component of Omron D4V-8107Z

Limit Switches Limit switch Rod lever
Stock : 1

FZ 502 electronic component of Pizzato FZ 502

Limit switch; plastic roller Ø14mm; NO + NC; 10A; max500VAC; IP67
Stock : 7

FX 554 electronic component of Pizzato FX 554

Limit switch; lever R 40mm, plastic roller Ø20mm; NO + NC; 10A
Stock : 0

Sensing & Control PK 88142 a Honeywell Division MODULAR PARTS Installation and adjusting instructions complete switch = operating head + base receptacle + switch body LZ metal-enclosed switches PK 88142 Complete Switch Description Operating Head Only LZA1 Side Rotary LZZ1A LZC1 Top Plain Plunger LZZ1C MOUNTING LZD1 Top Roller Plunger, roller parallel to mounting surface LZZ1D LZV1 Adjustable Top Plunger LZZ1V LZ may be mounted without unplugging the LZE1 Side Plain Plunger LZZ1E body from the base receptacle. Use two M5 or LZF1 Side Roller Plunger, roller parallel to mounting surface LZZ1F 10 screws that are at least 32mm (1.25 in.) LZG1 Side Roller Plunger, roller perpendicular to mounting surface LZZ1G LZZ1W long. A third mounting screw may be used by LZW1 Adjustable Side Plunger LZZ1H LZH1 Side Palm Plunger removing the knockout in the lower right LZZ1M-6C LZL1-6C Side Lever with lever bracket corner. Refer to Figure 1. REPLACEMENT LEVERS FOR WIRING SIDE ROTARY Up to 3mm or AWG12 wire may be used for Description Catalog Listing To order replacement levers, wiring to the self-lifting pressure plate-type Body with basic switch (Buna-N seal) LZZ21 order the same part number as screw terminals. Maximum width of spade Body with basic switch (Fluorocarbon seal) LZZ22 that which is metal stamped on Base Receptacle LZZ41 connectors or diameter of ring connectors is Adapter Plate LZZ42 either the lever or lever hub. For 8mm (.312 in.). A ground terminal, which is Lever bracket (without lever) LZZ43 other variations of levers, refer colored green for easy identification, also has Lever arm for above to Heavy Duty LS in Catalog 40. self-lifting pressure plate-type construction Nylon roller LZZ56C Steel roller LZZ56D (refer to Figure 1.). Boot for plungers LZZ44 After wiring, securely tighten the captive Plastic wobble stick LZZ57B Spring wire wobble stick LZZ57M screws in the plug-in unit for effective seal- 1 inch buttons ing. Also plug conduit opening with sealant to Black PWMZ22 ensure proper sealing. Red PWMZ23 Yellow PWMZ25 1 inch buttons ADJUSTMENT INSTRUCTIONS Black PWMZ32 Red PWMZ33 Actuator Head Yellow PWMZ35 All LZ actuator heads can be positioned in any of four directions. Loosen the four cap- tive head screws, place the head in the desired MICRO SWITCH WORLDWIDE SALES AND position, and securely tighten the screws. SERVICE Refer to Figure 2. MICRO SWITCH serves its customer through Top Roller Plunger a worldwide network of sales offices and dis- Position the top roller plunger in the desired tributors. For application assistance, pricing plane by locating the head as outlined under or name of nearest Authorized Distributor, Actuator Head. contact a nearby MICRO SWITCH sales office. Or, write MICRO SWITCH, Freeport, POSITIONING LEVER OF ROTARY TYPE Illinois 61032 phone 815/235-6600. The lever on rotary switches is adjustable to While we provide application assistance on any angular position through 360. Levers MICRO SWITCH products, personally and are reversible, they can also be shifted axially through our literature, it is up to the customer through approximately 3,2mm (.125 in.) on to determine the suitability of the product in the shaft. To adjust, or to assemble to switch, his application. loosen the screw with a 9/64 hexagon key wrench, move the lever to the desired posi- tion, and securely tighten the screw. The lever should be tightened until theteller ta can no longer be moved by hand. Hex key wrenches are provided in adjusting tool set LSZ4005. PK 8814 2 880 PRINTED IN USAPK 88142 PK 88142 SIDE ROTARY TYPE SIDE LEVER BRACKET TYPE CHANGING ACTUATION DIRECTION POSITIONING THE SIDE LEVER BRACKET REVERSING THE ROLLER LEVER ARM ON ROTARY TYPE The side lever bracket can be placed in any of Roller arms may be reversed to face the roller four positions. When combined with the four Rotary switches may be adjusted to operate to the inside or outside of the arm (refer to possible head positions, this makes for 16 clockwise, counterclockwise, or both. Instruc- Figure 7). It is recommended that the lever of possible positions for this type. Remove the tions are cast into the head (Figure 4). Follow side lever bracket forms be adjusted within lever with a 5/32 inch hexagon key wrench. these steps: the parameters shown in Figure 7. Use a 5/32 Loosen three captive bracket screws, place hexagon key wrench. 1. Loosen the four captive head screws and the bracket in the desired position, and remove head from switch housing. securely tighten the screws (refer to Figure 2. Switches are assembled with the plunger 6). set for both way operation. (See drawing Figure 4.) Both way actuation: plunger point in twelve o clock position (towards the actuator). To change mode of operation pull the spring loaded plunger outward with pli- ers to the stop. With plunger, pulled turn the point in the direction of operation required. Clockwise actuation only: turn clock- wise to three o clock position. Counterclockwise actuation only: turn counterclockwise to nine o clock posi- tion. 3. Release plunger, it will snap into the head into a locked position. 4 . Replace operating head on switch hous- ing and securely tighten screws. 5 . Check for desired operation by actuating switch and listening forclic. HEX HEAD SCREWS If you prefer to loosen and tighten the lever with a pliers or a screwdriver, a packet of 50 hex head screws, with screwdriver slot, is WOBBLE STICK ACTUATOR TYPE available separately (catalog listin g 15PA164-LS) to replace the allen head screw REPLACING THE WOBBLE STICK furnished with the lever. To remove a wobble stick, firmly grasp the Adjusting tool set LSZ4005 consists of one wobble stick with a pair of pliers at the base of special 3/32 inch open wrench and necessary the wobble stick. (Figure 8, View A.) Turn the hexagon key wrenches to adjust all types of wobble stick counterclockwise to unscrew it. levers. To attach a wobble stick, start threading the actuator to the head by hand. Then firmly grasp the wobble stick with a pair of pliers as shown in Figure 8, View B. Turn the wobble stick clockwise to within 1/8 inch of the end of the threads.

Tariff Desc

8536.50.99 9900975 SWITCHES being ANY of the following
a toggle 240VAC current capacity NOT exceeding 3A
b toggle 28VDC current capacity NOT exceeding 3A
c toggle 125VAC current capacity NOT exceeding 6A
d toggle 250VAC current capacity NOT exceeding 6A
e toggle 12VDC current capacity NOT exceeding 16A
f push button max 250VAC current capacity NOT exceeding 1A
g rocker 12VDC current capacity NOT exceeding 30A
h rocker 250VAC current capacity NOT exceeding 10A
i rocker max 250VAC current capacity NOT exceeding 6A
j numeric keypad
k 4-way 100VAC 0.5A OR 25V DC1A
l push button 100VAC 0.5A OR 25VDC 1A
m micro OR mini-micro max 250VAC current capacity NOT exceeding 10A
n knife 50VDC
o mercury 24VDC current capacity NOT exceeding 2A

8536.50.99 9804137 SWITCHES PRINTED CIRCUIT BOARD surface-mount OR through-hole having BOTH of the following
a current rating NOT exceeding 100mA
b voltage rating NOT exceeding 50VAC OR DC

8536.50.99 17109836 SWITCHES PUSH BUTTON panel mount

8536.50.99 9304006 SWITCHES push button illuminated being ANY of
a square
b rectangular
c circular

8536.50.99 1798512 SWITCHES ELECTRICAL having ALL of the following
a length NOT greater than 3cm
b width NOT greater than 2cm
c maximum electric current capacity greater than 11A

8536.50.99 1108450 SWITCHES LIMIT hunting tooth rotating shaft

8536.50.99 17119033 SWITCHES ROCKER panel mounting

8536.50.99 702118 SWITCHES ELECTRIC ROTARY

8536.50.99 1799019 SWITCHES SLIDE being ANY a power switches
i voltage selector
ii two position

8536.50.99 1779783 SWITCHES foot operated having a voltage of NOT less than 230VAC

8536.5 8438589 SWITCHES hall effect magnetically operated

8536.50.99 1812211 SWITCHES PUSHBUTTON mushroom OR dome shaped

8471.60.00 91 Joystick Free

8531.80.00 Electric sound or visual signalling apparatus eg bells, sirens, indicator panels, burglar or fire alarms Other apparatus Free

8541.40.00 54 LED displays Free
Honeywell
Honeywell Clarostat
Honeywell Hobbs
Honeywell MICRO SWITCH
Honeywell / Clarostat
Honeywell / Hobbs
Honeywell / MICRO SWITCH
Honeywell Aerospace
Honeywell International
Honeywell International Inc
Honeywell International Inc.
HONEYWELL M&PS
Honeywell Microelectronics & Precision Sensors
HONEYWELL S&C
HONEYWELL S&C / CLAROSTAT
HONEYWELL S&C / HOBBS
HONEYWELL SAFETY
Honeywell Sensing and Control
Honeywell Sensing and Control EMEA
Honeywell Sensing and Productivity Solutions
Honeywell Sensing and Productivity Solutions T&M
Honeywell SSEC
Honeywell Test & Measurement

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON ELECTRONICS
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronic Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing.
All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted