ZH10 Series Hall-effect Zero Speed Sensors DESCRIPTION The aluminum package is simple to install and adjust. It does The ZH10 Hall-effect Speed Sensor Sensors provide a not require rotational orientation. durable, cost-effective solution in most harsh environments. The sensor is available in a 11,9 mm 15/32 in/0.46875 in diameter, in a 25,4 mm 1.00 in length. FEATURES POTENTIAL APPLICATIONS Low cost Industrial process control Omni-directional sensor to target orientation Factory automation Digital output Rotary applications, such as: Small size Pumps Low power consumption Rollers Mixers Fan speed measurement Transmission Spindles Gear reducer RPM Process speed Synchronization Generator set Compressor speed Dyno testing ZH10 Series SENSOR SPECIFICATIONS Characteristic Minimum Maximum Unit Condition Supply voltage 4 24 Vdc Supply current 6 mA Output current 30 mA short circuit protected Output on voltage 0.6 Vdc at 25 mA load Output configuration open drain MOFSET Voltage low 0.4 V at 30 mA max. sink Voltage high Vdc 30 Target orientation omnidirectional Duty cycle 35 65 % within operating gap Operating frequency 0 15 k Hz no orientation required Output signal rise/fall time 4.0 s 880 Ohm, 20 pF Dielectric strength 200 Vac <2 mA leakage at gaps below curve (see Air Gap Operation gap Performance Curve) Output impedance 4.7 5.3 kOhm Operating temperature range -40 -40 100 212 C F Storage temperature 125 257 C F Sealing IP67 Shock 50 Gs, 11 ms Vibration 15 Gs, 10 Hz to 2000 Hz Housing material aluminum MOUNTING DIMENSIONS (For reference only: mm/ in ) 2 www.honeywell.com/sensing