CMT2250AW-ESR

CMT2250A CMT2250A 300 480 MHz OOK Receiver with Decoder Features Applications Embedded EEPROM Low-Cost Consumer Electronics Applications Remote Control Very Easy Development with RFPDK All Features Programmable Smart LED Control (On/Off Dimming) Home Security and Alarm 3-wire SPI Interface for EEPROM Programming Frequency Range: 300 to 480 MHz Garage and Gate Openers Home and Building Automation Symbol Rate: 0.1 to 40 ksps Sensitivity: -114 dBm at 1 ksps, 0.1% BER Industrial Monitoring and Controls Sensor Networks Stand-Alone, No External MCU Control Required Embedded 1920, 1527 and 2262 Data Decoder Health Monitors Remote Keyless Entry (RKE) 4 Data Outputs Configurable Duty-Cycle Receive Mode Low Power Consumption: 3.8 mA Ordering Information Low Sleep Current 60 nA When Sleep Timer Off Part Number Frequency Package MOQ 440 nA When Sleep Timer On CMT2250A-EQR 433.92 MHz QFN16 5,000 pcs ID Study, Factory Code Supported CMT2250A-EDB 433.92 MHz DIP16 1,000 pcs RoHS Compliant CMT2250A-ESR 433.92 MHz SOP16 2,500 pcs Available in QFN16( 3x3), DIP16 and SOP16 Packages Descriptions The CMT2250A is a true single-chip, ultra low power and high performance device that consists of an OOK RF receiver, a data decoder and 4 data output pins for various 300 to 480 MHz wireless applications. The device integrates a data decoder that is not only compatible with the most common used encoding format of 1527 and 2262, QFN16 (3X3) but also a more efficient, flexible and powerful format of 1920 designed by CMOSTEK. The device delivers sensitivity up to -114 dBm while consuming only 3.8 mA current when it is always on. An embedded EEPROM allows the frequency, symbol rate and other features to be programmed into the device using the CMOSTEK USB Programmer and RFPDK. Alternatively, in stock product of DIP16 433.92 MHz is available for immediate demands with no need of EEPROM programming. When pairing the device to CMOSTEK transmitters, the synchronization ID can be programmed into both of the transmitter and receiver during the manufacturing phase, or studied by the receiver from the transmitter remotely by end customers. The CMT2250A TM is part of the CMOSTEK NextGenRF family, together with SOP16 CMT215x series transmitters, they enable ultra low cost, low power consumption RF links. Rev 1.1 Page 1 / 4 Copyright By CMOSTEK www.cmostek.com CMT2250A VCOP 1 16 DATA3 VCON 2 15 DATA2 12 11 10 9 GND 3 XIN 14 GND 8 XIN 13 RFIN 4 13 XOUT RFIN 7 XOUT 14 GND 5 12 DATA1 GND 15 6 DATA1 VDD 6 DATA0/TEST 11 VDD 16 5 DATA0/TEST NC CSB 7 10 1 2 3 4 8 SCL SDA 9 QFN16(3x3) Top View SOP16/DIP16 Top View Table 2. CMT2250A Pin Descriptions in QFN16 (3x3) Package Pin Number Name I/O Descriptions 1 CSB I 3-wire SPI chip select input for EEPROM programming 2 SDA IO 3-wire SPI data input and output for EEPROM programming 3 SCL I 3-wire SPI clock input for EEPROM programming 4 NC - Not connected, leave floating Data output, connect to an LED or other device 5 DATA0/TEST O Receiving data output for production test purpose 6 DATA1 O Data output, connect to an LED or other device 7 XOUT O Crystal oscillator output 8 XIN I Crystal oscillator input or external reference clock input 9, 10 DATA2, DATA3 O Data outputs, connect to LEDs or other devices 11 VCOP IO VCO tank, connected to an external inductor 12 VCON 13, 15 GND I Ground 14 RFIN I RF signal input to the LNA 16 VDD I Power supply input Table 1. CMT2250A Pin Assignments in SOP16/DIP16 Package Pin Number Name I/O Descriptions 1 VCOP IO VCO tank, connected to an external inductor 2 VCON 3, 5 GND I Ground 4 RFIN I RF signal input to the LNA 6 VDD I Power supply input 7 CSB I 3-wire SPI chip select input for EEPROM programming 8 SDA IO 3-wire SPI data input and output for EEPROM programming 9 SCL I 3-wire SPI clock input for EEPROM programming 10 NC - Not connected, leave floating Data output, connect to an LED or other device 11 DATA0/TEST O Receiving data output for production test purpose 12 DATA1 O Data output, connect to an LED or other device 13 XOUT O Crystal oscillator output 14 XIN I Crystal oscillator input or external reference clock input 15,16 DATA2, DATA3 O Data outputs, connect to LEDs or other devices Rev 1.1 Page 2 / 4 www.cmostek.com CSB VCON SDA VCOP SCL DATA3 NC DATA2