5921 Hubbell

Powerpole Connectors - PP120: up to 240 Amps PP120 series Powerpole housings are designed to accommodate up to 1/0 (50 mm) wires and handle high currents up to 240 amps. Reducing bushings allow PP120 to accept down to 8 (10 mm) wires. Multiple colors of stackable housings combine with APP s low resistance flat wiping technology to offer powerful connection capability. Large Wire Range Accommodates up to 1/0 (50mm) Wire Reducing bushings allow as small as 8 (10 mm) wire to be used Low Resistance Silver Plated Copper Contacts Allows currents up to 240 amps UL Rated for Hot Plugging up to 60 Amps Great for battery or other applications where the ability to interrupt circuits is required PP120 ORDERING INFORMATION PP120 Housings The second to largest Powerpole housing can be used with wire contacts for up to 1/0 AWG 50mm or busbar contacts. Description -------- Part Numbers -------- 22.2 Minimum Quantity ... 500 50 ....... 0.88 69.9 Red 1321G3-BK 1321G3 2.75 Green 1321G4-BK 1321G4 22.2 23.7 Black 1321G1-BK 1321G1 0.88 0.93 White 1321G2-BK 1321G2 117.5 Blue 1321-BK 1321 4.63 Gray 1321G8-BK 1321G8 PP120 Silver Plated Wire Contacts Silver plated contacts offer superior electrical performance and durability up to 10,000 mating cycles. New contacts for 1 to 1/0 AWG (35 to 50 mm) offer extended capability in the same housings. See reducing bushings in accessory section for smaller wires. Mating - A - - B - AWG mm Force -------- Loose Piece Part Numbers -------- inches mm inches mm Minimum Quantity ........ 600 500 50 .................................................... 1/0 53.5 Low 1323G2-BK - 1323G2 0.52 13.21 0.44 11.18 NEW 1 42.4 Low 1323G1-BK - 1323G1 0.47 11.94 0.39 9.91 2 33.6 High - 1319-BK 1319 0.44 11.18 0.34 8.64 4 21.1 High - 1319G4-BK 1319G4 0.44 11.18 0.29 7.37 6 13.3 High - 1319G6-BK 1319G6 0.44 11.18 0.22 5.59 21.3 50.8 0.84 2.0 B 10.4 A 0.41 www.andersonpower.com All Data Subject To Change Without Notice - 36 - SECTION 2 Powerpole PP120SECTION 2 Powerpole PP120 PP120 SPECIFICATIONS Electrical Mechanical Current Rating Amperes UL 1977 CSA Wire Size Range AWG mm Singlepole UL 1977 (1/0 AWG) 240 155 Wire Contacts with Bushings 10 to 1/0 5.3 to 53.5 2x2 Block UL 1977 (1/0 AWG) 200 110 Max. Wire Insulation Diameter in. mm Voltage Rating AC/DC 0.600 15.240 UL 1977 600 Operating Temperature F C Dielectric Withstanding Voltage -4 to 221 -20 to 105 Volts AC 2,200 Mating Cycles No Load by Plating Silver (Ag) Avg. Mated Contact Resistance Milliohms Wire Contacts 10,000 5 1/2 of 2 AWG wire 0.136 Avg. Mating / Unmating Force Lbf. N UL Hot Plug Current Rating Amperes 8 36 250 cycles at 120V DC 60A Min. Contact / Spring Retention Force Lbf. N 60 267 Materials Housing Protection Plastic Resin Polycarbonate Touch Safety with Wire Contacts Contact Retention Spring Stainless Steel IEC 60529 IP10 Housing Flammability Rating Based on: 105C rated or better cable of the largest size, Properly calibrated APP recommended tooling, and UL94 V-0 a 25C ambient temperature. UL rating not to exceed the maximum operating temperature. CSA rating below a 30C temperature rise. Contact Limited by the thermal properties of the connector plastic housing. Base Copper Alloy Use APP recommended tooling only. Alternate tools may adversely affect the performance of our connectors Plating Silver along with UL and CSA recognition. Contact Termination Methods Crimp Wire Contacts Hand Solder Wire Contacts PP120 TEMPERATURE CHARTS PP120 Singlepole PP120 Multipole Temperature Rise at Constant Current Temperature Rise at Constant Current 60 60 50 50 40 40 30 30 20 20 10 10 0 0 0 50 100 150 200 250 0 50 100 150 200 250 Amperes Applied Amperes Applied 1/0 AWG 1 AWG 2 AWG 1/0 AWG 1 AWG 2 AWG 4 AWG 6 AWG 4 AWG 6 AWG NOTE: Temperature rise charts are based on a 25C ambient temperature. Derating charts on the following page. All Data Subject To Change Without Notice www.andersonpower.com - 37 - Temperature (C) Temperature (C)