Data Sheet Formable microwave cable SR 118 TP Item: 22820073 Description Semi-rigid: Semi-rigid, formable microwave cables 50 Ohm, 40 GHz, 125C, 2.95 mm, no jacket Technical Data Construction Material Detail Diameter Centre conductor Copper, Silver plated Wire 0.81 mm Dielectric PTFE-LD 2.41 mm Outer conductor Copper, Tin plated Tube, 100% 2.95 mm Electrical Data Impedance 50 +/- 1.5 Operating Frequency 40 GHz Capacitance 76.2 pF/m Velocity of signal propagation 80 % Signal delay 4.17 ns/m Screening effectiveness 120 dB (up to 18 GHz) Operating voltage 1.2 kVrms (at sea level) Test voltage 3.5 kVrms (50 Hz/1 min) Mechanical Data Weight 3.4 kg/100 m Min. bending radius static 9.53 mm Environmental Data Temperature range -55 C ... +125 C Installation temperature -20 C... +60 C Halogen free No 2011/65/EU (RoHS - including compliant 2015/863 and 2017/2102) 1907/2006/EC (REACH) compliant 2000/53/EC (ELV) compliant 2012/19/EU (WEEE) no special marking needed Additional Information Remarks (For details refer to the HUBER+SUHNER RF CABLES GENERAL CATALOGUE or contact your nearest HUBER+SUHNER partner) Suitable Connectors Cable group Y10 2 mm / 50 Ohm Document: DOC-0000177970 BA / PDO A / date of publication: 02.12.2020 11:14:44 / uncontrolled copy Page 1/2Data Sheet Formable microwave cable SR 118 TP Item: 22820073 Matrix typical Attenuation formula: (a*f 0.5 + b*f) and maximum Power CW formula: (p/f 0.5) Coefficients: a = 0.3804 b = 0.00791 f = 40 P at 1GHz = 598 max Frequency Nom. attenuation Nom. attenuation Max. CW power (GHz) (dB / m) (dB / ft) (W) sea level 25 C sea level 25 C sea level 40 C ambient ambient ambient temperature temperature temperature 2.0 0.55 0.169 423 4.0 0.79 0.242 299 6.0 0.98 0.298 244 8.0 1.14 0.347 211 10.0 1.28 0.391 189 12.0 1.41 0.431 173 14.0 1.53 0.468 160 16.0 1.65 0.502 150 18.0 1.76 0.535 141 20.0 1.86 0.567 134 22.0 1.96 0.597 127 24.0 2.05 0.626 122 26.0 2.15 0.654 117 28.0 2.23 0.681 113 30.0 2.32 0.707 109 32.0 2.4 0.733 106 34.0 2.49 0.758 103 36.0 2.57 0.782 100 38.0 2.65 0.806 97 40.0 2.72 0.830 95 HUBER+SUHNER is certified according to ISO 9001, ISO 14001, AS/EN9100, ISO/TS 16949 and IRIS. www.hubersuhner.com Waiver: Fact and figures herein are for information only and do not represent any warranty of any kind. Document: DOC-0000177970 BA / PDO A / date of publication: 02.12.2020 11:14:44 / uncontrolled copy Page 2/2