swiss made MPT Probes Multi-purpose tools for electronics, chemistry and watchmaking. Applications: probe for lead-free soldering operations positioning aid tool for assembly operations spatula for applying adhesives, dosing chemicals in labs stirring rod for the preparations of adhesives, solutions scraper to remove solder masking agents, rubber latex, adhesive coatings microscopy sampling applications Probes are wear resistant and the soft tips do not scratch delicate surfaces. Available in three different types and materials or a complete set. MPT1R MPT2 Rounded body - Fine tip and flat strong tip Squared body - Curved fine tip and flat strong tip Lenght: 150 mm, 5.90 Lenght: 150 mm, 5.90 MPT3 MPT123 Squared body - Flat fine sharp tip and flat large fine tip Kit of MPT1R, MPT2, MPT3 Lenght: 140 mm, 5.51 Model Material CP SV NY MPT1R MPT1RCP MPT1RSV MPT1RNY MPT2 MPT2CP MPT2SV MPT2NY MPT3 MPT3CP MPT3SV MPT3NY MPT123 MPT123CP MPT123SV MPT123NY www.ideal-tek.com 1swiss made Different materials available High-performance plastic type CP PEEK polyetheretherketone reinforced with carbon nano very hard, rigid, high tensile and flexural strength, very high wear resistance high heat capability (260-300C), good dimension stability, low thermal linear expansion coefficient excellent resistance to chemicals and aggressive agents, excellent resistance to thermal ageing 6 ESD-safe material 10 Ohm typical applications include handling of components in cleaning/chemical/assembly processes also at high temperature (soldering) High performance plastic type SV PVDF polyvinylidene fluoride carbon fibre reinforced excellent mechanical strength and toughness smooth surface heat stabilized, high heat capability, continuous use temperature up to 150C high purity (clean room and medical devices approved, low extraction value) excellent chemical resistance to most aggressive substances (mineral and organic acid) and solvents (hydrocarbons, alcohols, halogenated), resistant to halogens outstanding resistance to hydrofluoric acid (40% conc., 90C), nitric acid (50% conc., 90C), hydrochloric acid (36% conc., 90C) high abrasion resistant resistant to UV and nuclear radiation (sterilisation) ESD safe material, (avoid powder attraction, sparks generation, ignition sources) typical applications include handling of very scratch- and contamination-sensitive components, cleaning and etching processes Engineering plastic type NY PA66/GF50 polyamide 66 reinforced with 50 wt% glass fibre high strength, fatigue, wear and creep resistance heat stabilized, good heat capability good chemical resistance (oils, grease, fuels, non polar solvents) not resistant to strong acids, alkalis and hot water or steam insulative www.ideal-tek.com 2