33-864 Ideal Industries

Amplifier Probe and Tone Generator Amplifier Probe n Designed to identify and trace wires or cables within a group without damaging the insulation n Battery low indicator Tone Generator n Three different tones selected from front panel n Auto-off of tone after three hours to conserve battery life n F-Connector port for toning & tracing coaxial CATV cabling systemsAmplifier Probe The Amplifier Probe is designed to identify and trace wires or cables within a group without damaging the insulation. It allows for pin point identification even in the most congested cable bundles. Our unit can be used with any tone generator. Features n Works with any Tone Generator (62-160) to identify wires n Volume control for increased sensitivity and adjustable to Battery Low Indicator suit work environment (Solid light means n Recessed ON/OFF button prevents battery drain replace battery) n Battery low indicator n 9 volt battery included Volume Control Recessed ON/OFF Button Speaker Description Cat. No. Amplifier Probe 62-164 Tone Generator 62-160 Tone Generator F-Connector Use the IDEAL tone generator (62-160) to apply a tone signal to a Port wire pair or single conductor, and trace with an amplifier probe (IDEAL 62-164). When used with the amplifier probe, the tone generator allows technicians to identify a wire within a bundle, at a Dual cross connect or at a remote end. It can be used on twisted pair, Function coax, and de-energized AC wiring. LEDs Three Position Features Status Switch n F-connector port for toning and tracing of coaxial CATV cabling systems Tone Button n Three different tones selected from front panel n Tone can be added in any status allows test sets without monitor feature to pick up tone n Separate Talk Battery status for increased voltage and power for test sets Telephone Line n Auto-OFF of tone after three hours to conserve battery life Status LEDs n Constant tone amplitude over life of battery n Two tone amplitude normal and half n No power draw in continuity status with leads open n RJ jack allows use of modular cable or alligator clips n Low battery LED indicates when to change battery n 9 volt battery included