Overview XW Series E-Stops Interlock Switches Enabling Switches Safety Control Relays Light Curtains AS-Interface Safety at Work HE2G Enabling Switches HE2G Compact Grip Enabling Switch Key features: New compact, light-weight grip switch provides a comfortable hold Compact design fits comfortably in the hand Light operating force ensures worry-free operation 3-position switch with distinctive tactile feedback Dual enabling contacts ensure a high level of safety Part Numbers Additional Control Units Rubber Boot Color Solder Terminal Internal Connector Yellow HE2G-21SH HE2G-21SC None Gray HE2G-21SH-1N HE2G-21SC-1N Estop HE2G-21SHE Estop and Green Pilot Light HE2G-21SHE-P-0 Two Momentary Pushbuttons Yellow HE2G-21SH-L-L E-Stop and Two Momentary Pushbuttons HE2G-21SHE-L-L HE2G-21SCE-L-L E-Stop, Momentary Pushbutton and Key Switch HE2G-21SHE-L-K HE2G-21SCE-L-K 1. Additional control units installed on the HE2G are as follows: 2. Silicon rubber: Can be used in general factories. Remains flexible in cold temperatures. Suitable in applications with a Emergency Stop Switch: XA1E-BV3U02R wide operating temperature range. Momentary Pushbutton: AB6M-M2PLW 3. NBR/PVC polyblend: Oil-proof. Suitable for environments subjected to machine oil and painting robots where silicon Key Selector Switch: AS6M-2KT2PA Pilot Light: UP9P-2498G rubber cannot be used. 1705151129 800-262-IDEC (4332) USA & Canada 413HE2G Enabling Switches Specifications UL508 (UL recognition) CSA C22.2, No. 14 (c-UL recognition) Applicable Standards IEC/EN 60947-5-1 (TV) GS-ET-22 (TV approval) ISO 12100-1, -2 IEC 60204-1/EN 60204-1 ISO11161 / prEN11161 Applicable Standards for Use ISO 10218 / EN 775 ANSI/RIA R15.06 ANSI B11.19 Silicon rubber boot: 25 to 60C (no freezing) Operating Temperature NBR/PVC Polyblend rubber boot: 10 to 60C (no freezing) Relative Humidity 45 to 85% (no condensation) Storage Temperature 40 to +80C (no freezing) Pollution Degree 3 Contact Resistance 50 m maximum (initial value) Between live and dead metal parts: 100 Mminimum (500V DC megger) Insulation Resistance Between terminals of different pole: 100 Mminimum (500V DC megger) (Solder terminal) Grip style enabling switch/emergency stop switch: 2.5 kV Momentary pushbutton/key selector switch: 1.5 kV Impulse Withstand Voltage Pilot light: 500V AC, 1 minute (between live and dead parts) (Internal connector) Grip style enabling switch/emergency stop switch/momentary pushbutton/key selector switch: 1.5 kV Electric Shock Protection Class Class II (IEC 61140) (With pilot light: class III) Operating Frequency 1,200 operations per hour Position 1 2 1: 1,000,000 operations minimum Mechanical Life Position 1 2 3 1: 100,000 operations minimum 100,000 operations minimum (rated load) Electrical Life 1,000,000 operations minimum (24V AC/DC, 100 mA) 2 Operating extremes: 150 m/s (15G) Shock Resistance 2 Damage limits: 1,000 m/s (100G) Operating extremes: 5 to 55 Hz, amplitude 0.5 mm minimum Vibration Resistance Damage limits: 16.7 Hz, amplitude 1.5 mm minimum 2 Solder terminal: 0.5 mm maximum (20 AWG) Applicable Wire 2 Internal connector: 0.05 to 0.86 mm (AWG18 to 30) 2 Solder terminal: 0.5 mm (20 AWG) Applicable Wire Size 2 Internal connector: 0.05 to 0.86 mm (AWG18 to 30) (AWG22 between switch and connector) Applicable Cable Outside diameter: 4.5 to 10 mm Conduit Port Size M16 (cable gland is supplied) Terminal Tensile Strength 20N minimum With control unit: IP67/IP66 (IEC 60529) Degree of Protection Without control unit: IP65 (IEC 60529) Conditional Short-circuit Current 50A (250V) (Use 250V/10A fast-blow fuse for short circuit protection.) Direct Opening Force 60N minimum (monitor switch) Operator Strength 500N minimum (when pressing the entire button surface) HE2G-21SH: 140g HE2G-21SH-P-0/-21SC: 145g HE2G-21SHE/-21SC-P-0: 150g HE2G-21SH-L-L/-21SHE-P-0/-21SCE: 155g Weight (approx.) HE2G-21SH-L-K/-21SCE-P-0: 160g HE2G-21SHE-L-L/-21SC-L-L: 165g HE2G-21SHE-L-K/-21SC-L-K: 170g HE2G-21SCE-L-L: 175g HE2G-21SCE-L-K: 180g 1705151129 www.IDEC.com 414 AS-Interface Safety at Work Light Curtains Safety Control Relays Enabling Switches Interlock Switches XW Series E-Stops Overview