Overview XW Series E-Stops Interlock Switches Enabling Switches Safety Control Relays Light Curtains AS-Interface Safety at Work 1 1 2 2 3 3 4 4 + + - - HS1B Interlock Switches HS1B Full Size Interlock Switches Key features: Rugged aluminum die-cast housing Direct Opening Action Available with or without an indicator (red or green) Flexible Installation: Two actuator entries and three conduit ports are provided Select from two circuit configurations (1NO-1NC or 2NC). IP67 Part Numbers Body Actuator Keys and Accessories (order separately) Contact Pilot Appearance Part Number Description Model Part Number Configuration Light Straight Actuator Without HS1B-11R HS9Z-A1 (Mainly for sliding doors) Red LED HS1B-114R-R 1NC-1NO Right-angle Actuator HS9Z-A2 Green (Mainly for rotating doors) HS1B-114R-G LED Auxiliary Circuit Main Circuit Without HS1B-02R HS9Z-A3 Adjustable Actuator Red LED HS1B-024R-R 2NC Green HS1B-024R-G HS9Z-T1 Key Wrench (included with switch) LED Main Circuit Auxiliary Circuit Standard stock items in bold. HS9Z-P1 Conduit Opening Plug Actuators are not included and must be ordered separately. Specifications IEC60947-5-1, EN60947-5-1, GS-ET-15, UL508, Conforming to Standards CSA C22.2 No. 14 Operating Temperature 20 to +70C (no freezing) Storage Temperature 40 to +80C Relative Humidity 45 to 85% (no condensation) Altitude 2,000m maximum Rated Insulation Voltage (U ) 300V (between LED and ground: 60V) i Impulse Withstand Voltage (U ) 4 kV (between LED and ground: 2.5 kV) imp Between live and dead metal parts: 100 M minimum Between live metal part and ground: 100 M minimum Insulation Resistance Between live metal parts: 100 M minimum Between terminals of the same pole: 100 M minimum Electric Shock Protection Class Class I (IEC61140) Pollution Degree 3 (IEC60947-5-1) Degree of Protection IP67 (IEC60529) Operating Extremes 10 to 55 Hz, amplitude 0.5mm p-p Vibration 2 Resistance Damage Limits 60 m/sec (approx. 6G) 1705151128 800-262-IDEC (4332) USA & Canada 313HS1B Interlock Switches 2 Shock Resistance 1,000 m/sec (approx. 100G) Actuator Operating Speed 0.05 to 1.0m/s Direct Opening Travel 11 mm minimum Direct Opening Force 20N minimum Thermal Current (I ) 10A th Operating Frequency 900 operations/hour Mechanical Life 1,000,000 operations Electrical Life 100,000 operations (rated load) Conditional Short-circuit Current 100A (IEC60947-5-1) Recommended Short Circuit Protection 250V, 10A fuse (Type D01 based on IEC60269-1, 60269-2) Operating Voltage 24V DC Current 10 mA Indicator Light Source LED lamp Lens Color Red or Green (12 mm dia. Lens) Weight Approx. 280g Contact Ratings Operating Voltage (U ) 30V 125V 250V e Resistive load (AC12) 10A 10A 6A AC Rated Operating Current (I ) Inductive load (AC15) 10A 5A 3A e Resistive load (DC12) 8A 2.2A 1.1A DC Inductive load (DC13) 4A 1.1A 0.6A Application Examples and Circuit Diagrams Status 1 Status 2 Status 1 Status 2 Door/ Door/ Door Closed Door opened Door Closed Door opened Switch Switch Machine ready to operate Machine cannot be started Machine ready to operate Machine cannot be started Status Status Door 1 1 2 2 HS1B-02 1 1 (2NC) 3 3 Circuit 2 2 4 4 Diagram HS1B-11 (1NO-1NC) 3 3 + + Circuit 4 4 - - Diagram + + - - Main Main 3-4: Closed 3-4: Open 3-4: Closed 3-4: Open Circuit Circuit Aux. Aux. 1-2: Open 1-2: Closed 1-2: Closed 1-2: Open Circuit Circuit 1. Main Circuit: used to enable the machine to start only when the main circuit is closed. Auxiliary Circuit: used to indicate whether the main circuit or door is open or closed. 2. Terminals + and - are used for the LED indicator, and are isolated from door status. Wire the terminals only when needed. 1705151128 www.IDEC.com 314 AS-Interface Safety at Work Light Curtains Safety Control Relays Enabling Switches Interlock Switches XW Series E-Stops Overview Main Circuit Auxiliary Circuit Main Circuit Auxiliary Circuit Main Circuit Auxiliary Circuit Main Circuit Auxiliary Circuit