22mm - HW Series Switches & Pilot Devices HW Series 22mm IEC Style Global Pushbuttons Key features: Locking lever removable contact blocks Finger-safe IP20 contacts Tamperproof construction All E-stops meet EN60947-5-5, and are compliant with SEMI S2 standards Worldwide approvals Easy to assemble Choice of black plastic or metallic front bezels LED illumination Transformer or full voltage Slow make double break contacts HW: The Best Engineered Switch in the World IDECs HW switches are The best engineered switch in the world for a reason. Carrying the CE include illuminated and non-illuminated pushbuttons, pilot lights, selector switches, and mark, UL, CSA, CCC (Chinese), and TUV approvals, these switches are designed for use in almost emergency stop switches. any part of the world. All switches also incorporate mechanically keyed safety locking levers, ensuring correct Complete with finger-safe contact blocks offering IP20 protection, these 7/8 (22mm) switches installation and maintaining safety in high-vibration applications. Certificate No. Certificate No. File No. E68961 File No. LR21451 R50086203 HW e-stop 2017010305987846 R50391189 HW Specifications AC-15: A600 or Ue = 250V, le = 3A (NO, NC, NO-EM, NC-LB) Rated Operational Characteristics DC-13: P600 or Ue = 125V, le = 1.1A (NO, NC) DC-13: Q600 or Ue = 125V, le = 0.9A (NO-EM, NC-LB) Rated Insulation Voltage 600V Rated Switching Over-Voltage Less than 4kV, conforming to IEC60947-1 Rated Impulse Withstanding Voltage 4kV for contact circuit, 2.5kV for lamp circuit Rated Thermal Current 10 Amp Minimum Switching Capacity 5 mA at 3V AC/DC Electrical Reliability MTBF < 1 fault for 10 million operation cycles (3V DC, 5mA) Lamp Ratings LEDs: 6V/17mA max, 12V & 24V/11mA max, 120 & 240V/10mA max Contact Operation Slow break NC or NO 5.5mm to 10mm travel to latch, 45N minimum force to latch Positive Action Operation 10mm maximum travel, 1,800 operations per hour maximum for a Pushlock Turn Reset (Emergency Stops with NC contacts) 900 operations per hour maximum for a Push-Pull Flush and extended pushbuttonswith 1NO or 1NC contact: 6.22N (momentary), 7.02N (maintained) Operating Force Additional contacts1NO or 1NC: +3.2N (momentary), + 3.3N (maintained) Recommended Terminal Unit Wire Number of Wires Tightening Torque (Nm) Screw Crimping Terminal 2 1.0 to 1.3 0.5 to 1.6 mm (AWG14 to 22) 2 1.0 to 1.3 Solid Wire HW-U Contact Block 1.7 to 2.0 mm (AWG12) 1 1.2 to 1.3 M3.5 Recommended Terminal Torque 2 0.3 to 2.0 mm (AWG14 to 22) 2 1.0 to 1.3 Stranded Wire 2 2.1 to 3.5 mm (AWG12) 1 1.2 to 1.3 Crimping Terminal Illuminated Unit (*1) Solid Wire 0.5 to 1.6 mm (AWG14 to 22) 2 1.0 to 1.3 M3.5 Stranded Wire 0.3 to 2.0 mm (AWG14 to 22) Crimping Terminal 0.6 to 1.0 (M3.0) Pilot Light Solid Wire 0.5 to 1.6 mm (AWG14 to 22) 2 Applicable Wire Size 1.0 to 1.3 (M3.5) Stranded Wire 0.3 to 2.0 mm (AWG14 to 22) 1. * refers to the lamp terminals of the illuminated push buttons and selector switches. Applicable Wire Size Minimum 1 x 22 AWG, max. 2 x 14 AWG or 1 x 12 AWG Contact Resistance Initial contact resistance of 50m or less Contact Gap 4mm (NO and NC), 2mm (NO-EM and NC-LB) Horsepower Rating Reference Value: 1/4 HP 120V (1 non-reversing), 1HP 240V (3 non-reversing) Contact Material Silver (gold plated contacts available - contact IDEC) Operating Temperature Operation: -25 to +60C (illuminated -25 to +50C dome -25 to +55C) 2 Vibration Resistance 10 to 55Hz, 98m/sec (10G) conforming to IEC6068-2-6 2 Shock Resistance 980m/sec (100G) conforming to IEC6068-2-7 Mechanical Life Momentary pushbuttons: 5,000,000 (900 operations per hour), All other switches: 500,000 1904032200 www.IDEC.com 634 Circuit Breakers Terminal Blocks Contactors Timers Relays & Sockets Signaling Lights Switches & Pilot Devices Mechanical ElectricalSwitches & Pilot Devices Signaling Lights Relays & Sockets Timers Contactors Terminal Blocks Circuit Breakers 22mm - HW Series Switches & Pilot Devices Conforming to Standards EN60947-1, EN60947-5-1, VDE0660-200, UL508, CSA C22-2 No.14 CSA: pushbuttons and selector switches: A600 pilot lights and illuminated pushbuttons, direct supply pilot lights and illuminated pushbuttons with integral transformer (100/110, 115, 120, 200/220, 230, 240, 380, File No. E68961 400/440, 480V) File No. LR92374 UL: pushbuttons and selector switches: A600 Approvals pilot lights and illuminated pushbuttons, direct supply pilot lights and illuminated pushbuttons with integral transformer (100/110, 115, 120, 200/220, 230, 240, 380, 400/440, 480V) TV: pushbuttons and selector switches: A600=P600 (NO, NC)/Q600 (NO-EM, NC-LB) pilot lights and illuminated pushbuttons, direct supply pilot lights and illuminated pushbuttons with integral transformer (100/110, 115, 120, 200/220, 230, 240, 380, Registration No. R9551089 (E-stops) Certificate No. 400/440, 480V) Registration No. R50054316 (Dual Pushbuttons) 2005010305145656 Registration No. J9650511 (Pilot Lights) Registration No. J9551458 (all other switches) Electric Shock Protection Class 2 conforming to IEC60664-7 1 Degree of Protection UL Type 1, 4X, 12, 13 (conforming to IEC60529 and UL50) IP65 (from front of the panel) IP20 (Type HW-U contact block) Pollution Degree (conforming to IEC60947-1) 3 External Short-Circuit Protection 10A 250V fuse conforming to IEC60269-1 Contact Block Type HW-U Rated Insulation Voltage 600V Pushbuttons Illuminated Pushbuttons Rated Continuous Current 10A Selector Switches Illuminated Selector Switches Contact Ratings by Utilization Category AC-15 (A600) Pushbutton Selectors IEC 60947-5-1 DC-13 (P600) Operational Voltage 24V 48V 50V 110V 220V 440V AC-12 Control of resistive loads & solid state 10A 10A 10A 6A 2A loads AC 50/60 Hz AC-15 Control of electromagnetic loads (> 72VA) 10A 7A 5A 3A 1A Operational Current DC-12 Control of resistive loads & solid state 10A 5A 2.2A 1.1A loads DC DC-13 Control of electromagnets 5A 2A 1.1A 0.6A For dimensions, see page 685. Note 1. Except HW2B LED Lamp Ratings (LSTD Type) Model LSTD-6k LSTD-1k LSTD-2k LSTD-H2k LSTD-M4k Lamp Base BA9S/13 Rated Voltage 6V AC/DC 12V AC/DC 24V AC/DC 120V AC 240V AC Voltage Range 6V AC/DC 10% 12V AC/DC 10% 24V AC/DC 10% 120V AC 5% 240V AC 5% A, R, W: 17mA AC 11mA 11mA 10mA 10mA G, S: 8mA Current Draw A, R, W: 14mA DC 10mA 10mA G, S: 5.5mA Color Code A (amber), G (green), R (red), S (blue), W (white) Lamp Base Color Same as illumination color Voltage Marking Die stamped on the base In place of k, specify Life (reference value) Approx. 50,000 hours (The luminance reduces to 50% the initial intensity when used on complete DC.) the Lens/LED Color Code. A, R, W A, R, W Internal Circuit G, S LED Chip LED Chip LED Chip Protection Diode Protection Diode Protection Diode Zener Diode Zener Diode Zener Diode 1904032200 800-262-IDEC (4332) USA & Canada 635 Characteristics Contact Ratings Standards & Approvals