PS3L Series Power Supplies PS3L S eries Metal Frame Switching Power Supplies Key features of the PS3L series include: Metal frame Wide power range: 10W-300W Universal input: 10W-30W: 85-264V AC/105-370V DC 50W-300W: 85-264V AC/105-350V DC Screw terminals, IP20 ( ngersafe) Power Factor Protection EN61000-3-2 EN61000-3-3 (50W to 300W models) Overcurrent/overvoltage protection Voltage +10% adjustment DIN rail or panel surface mount Approvals: UL508 Listed CE marked File E177168 UL508 listed EN50178 compliant EMC Directives EN50081-2 EN61000-6-2 LVD EN60950:2000 Rated Rated Part Rated Rated Part Item Watts Item Watts Voltage Current Number Voltage Current Number 5V DC 2A PS3L-A05AFF 12V DC 8.5A PS3L-E12AFF 12V DC 0.9A PS3L-A12AFF 10 100 24V DC 0.5A PS3L-A24AFF 24V DC 4.5A PS3L-E24AFF 5V DC 3A PS3L-B05AFF 12V DC 13A PS3L-F12AFF 15 12V DC 1.4A PS3L-B12AFF 24V DC 0.7A PS3L-B24AFF 150 24V DC 6.5A PS3L-F24AFF 5V DC 6A PS3L-C05AFF 12V DC 2.5A PS3L-C12AFF 30 24V DC 1.3A PS3L-C24AFF 300 24V DC 12.5A PS3L-G24AFF 12V DC 4.3A PS3L-D12AFF 50 24V DC 2.2A PS3L-D24AFF 118 www.idec.com Communication & Networking Sensors Power Supplies Automation Software Operator Interfaces PLCsCommunication & Networking PLCs Operator Interfaces Automation Software Power Supplies Sensors PS3L Series Power Supplies Speci cations PS3L-A PS3L-B PS3L-C PS3L-D PS3L-E PS3L-F PS3L-G24 Type (10W) (15W) (30W) (50W) (100W) (150W) (300W) Input Voltage 100 to 240V AC 100 to 240V AC (Single-phase two-wire) (Voltage range: 85 to 264V AC/105 to 370V DC) (Voltage range: 85 to 264V AC/105 to 350V DC) Frequency (AC input only) 47 to 63Hz 100V 0.25A 0.37A 0.68A 0.68A 1.4A 2.0A 3.8A Input Current (Typical) 200V 0.16A 0.23A 0.45A 0.34A 0.65A 0.95A 2.0A 100V 20A max. 20A max. 20A max. 30A max. 30A max. 30A max. 30A max. Inrush Current (Cold start) 200V 40A max. 40A max. 40A max. 60A max. 60A max. 60A max. 60A max. Leakage Current 0.75 mA max. (60Hz UL, CSA, VDE) Power Factor (Typical) 0.99 (100V AC input, rated output), 0.95 (200V AC, rated output) 5V DC: 70% 5V DC: 73% 5V DC: 75% Ef ciency (Typical) 12V DC: 74% 12V DC: 75% 12V DC: 77% 12V DC: 76% 12V DC: 78% 12V DC: 80% 24V DC: 78% 24V DC: 78% 24V DC: 79% 24V DC: 79% 24V DC: 81% 24V DC: 83% 24V DC: 81% 5V/2A 5V/3A 5V/6A Rated Voltage/Current 12V/0.9A 12V/1.4A 12V/2.5A 12V/4.3A 12V/8.5A 12V/13A 24V/0.5A 24V/0.7A 24V/1.3A 24V/2.2A 24V/4.5A 24V/6.5A 24V/12.5A Adjustable Voltage Range 10% (V.ADJ control on front) Output Holding Time 20msec minimum (at the rated input and output) Start Time 200msec maximum (at the rated input and output) 500msec maximum (at the rated input and output) Rise Time 100msec maximum (at the rated input and output) 200msec maximum (at the rated input and output) Input Fluctuation 5V: 20mV maximum, 12V: 48mV maximum, 24V: 96mV maximum Load Fluctuation 5V: 40mV maximum, 12V: 100mV maximum, 24V: 150mV maximum 5V 50mV maximum 5V: 60mV maximum Temperature Change 12V: 120mV maximum 12V: 150mV maximum (10 to +50C) 24V: 240mV maximum 24V: 290mV maximum 1 1 10 to 0C 5V: 160mV maximum, 12V/24V: 180mV maximum 200 mV maximum Ripple Voltage 1 0 to +50C 5V: 120mV maximum, 12V/24V: 150mV maximum 2 Overcurrent Protection 105% (Typical), Automatic reset 3 4 Overvoltage Protection 120% min. Output off at 120%, reset when input voltage is restored. Operation Indicator LED (green) Between input and output terminals: 3,000V AC, 1 minute Dielectric Strength Between input terminal and housing: 2,000V AC, 1 minute Between output terminal and housing: 500V AC, 1 minute Between input and output terminals: 100MW minimum (500V DC megger) Insulation Resistance Between input terminal and housing: 100MW minimum (500V DC megger) 5 Operating Temperature 10 to +70C 10 to +60C 10 to +65C Storage Temperature 30 to +75C Operating Humidity 20 to 90% RH (no condensation, no freezing) 2 Vibration Resistance 10 to 55Hz, 20m/s constant, sweep cycle 1 minute, 2 hours each in 3 axes 2 Shock Resistance 200m/s , 11ms, 1 shock each in 3 axes Dimensions H X W X D (mm) 97 x 35 x 86 97 x 35 x 86 96 x 35 x 114.5 97 x 37 x 147.5 97 x 54 x 200 97 x 62 x 200 158 x 63 x 230 Weight (Approx.) 240g 250g 340g 350g 630g 730g 1550g Terminal Screw M4 slotted-Phillips head screw (screw terminal type) 1. Including noise. Measured at the terminal block according to EIAJ. 2. Protection against short-circuit and overcurrent of 30 seconds maximum. Overload for 30 seconds or longer may damage the internal elements. 3. Zener limiter method 4. Turn the input off and after one minute, turn the input on again. 5. Refer to the derating characteristics. No freezing. The maximum temperature is the temperature at 100% output current (natural air-cooling) in the derating characteristics. USA: 800-262-IDEC Canada: 888-317-IDEC 119 Supplementary Output Input Functions Regulation