DPS-1-060-24

Y Y E E A A R R G G U U DPS Series 30W, 60W AC/DC DIN Rail Power Supplies AC - DC DIN rail mountable 30W and 60W class 2 power supplies z UL, cUL, CE z Universal input 85~264VAC z High efficiency z Short circuit protection z Internal input filter z 3 Year warranty Specificaton Model DPS-1-030-24 DPS-1-060-24 Input Voltage 85~264VAC Output Wattage 30W 60W Output Voltage 24VDC (Other output voltages available on request) Output Current 1250mA 2500mA Efficiency (min/typ) 83/86% 86/89% General Specification Isolation voltage 3000VAC Isolation resistance 100M 500VDC Ambient temperature -10 to +71C Derating (from 61 to 71C) 2.5%/C Storage temperature -25 to +85C Relative humidity 20 to 90% RH Cooling Free air convection Dimensions L90 x W40.5 x D115 mm Weight 290g 360g Case material Plastic Input Specifications Rated input voltage 100 to 240VAC Input voltage range 85 to 264VAC, 90 to 375VDC Line frequency 47 to 63Hz Inrush current 20A 115VAC, 40A 230VAC 30A 115VAC, 60A 230VAC Output Specifications Output voltage accuracy 1% Minimum load 0% Line regulation 0.5% Load regulation 0.5% Turn on time 1000mS after AC applied to input at full resistive load Voltage fall time 150mS Voltage rise time 150mS at full resistive load Hold up time 20mS 115VAC, 30mS 230VAC Temperature coefficient 0.02%/C Ripple & noise 50mV Voltage trim range 24 to 28VDC DC ON indicator threshold at start up 19.2VDC Control and Protection Rated over load protection 110 to 140% 110 to 150% Over voltage protection 30 to 33VDC Output short circuit Fold forward Approvals and Standards CE, UL/cUL DPS-1-30-60/07/07 www.imopc.com A A R R A A N N T T E E E E40.5 115 5 4 3 2 1 - - + +Rdy Vout adj. DC ON DPS Series 30W, 60W AC/DC DIN Rail Power Supplies N L Dimensions (mm) Pin connections 6 7 8 40.5 115 Key Description Rdy (1) DC OK output for relay (24V models only) 5 4 3 2 1 + (2) Positive output terminal RL >700 + (3) Positive output terminal 40.5 115 - - + +Rdy Rdy - (4) Negative output terminal 5 4 3 2 1 100 - (5) Negative output terminal ( 6) Ground terminal to minimize high-frequency emissions N ( 7) Input terminals (neutral conductor, no polarity at DC input) Vout adj. - - + +Rdy 75 -Vout L (8) Input terminals (phase conductor, no polarity at DC input) DC ON DC ON Operation indicator LED a) Relay Vout adj. Trimmer-potentiometer for Vout adjustment Vout adj. DC ON 2.2K Rdy Installation Construction N L 0.5W Ventilation/Cooling Easy, safe and secure 5.1K Normal convection snap-on, snap-off 6 7 8 0.3W 0 All sides 25mm free space DIN-Rail mounting -Vout -10 61 71 N L for cooling recommended (TS35/7.5 or TS35/15) Temperature (C) b) 5V signal Terminal size range 2 Solid:0.2-2.0mm (AWG24-14) 6 7 8 RL >700 (use copper conductors only) Rdy Connections 22.5 115 100 RL >700 2 1 75 Rdy -Vout Fuse L Vo+ 100 Inrush Current V - V+ Line Switching DC Output Limiter and Rectifier a) Relay Filter Device Current Rectifier N Vo- Detection LO 75 -Vout ON Y PWM 2.2K Rdy Controller Opto- Reference & 0.5W a) Relay Vout adj. Isolation Error Amp. Vout adj. 5.1K 0.3W 0 2.2K Rdy -Vout -10 61 71 DC ON 0.5W Temperature (C) b) 5V signal (Green LED) Output Level N L Detection 5.1K RDY(Open 0.3W 0 Collector)* -Vout *24V models only -10 61 71 3 4 5 Temperature (C) b) 5V signal Rdy connections Derating L Fuse Vo+ Inrush Current Line Switching Limiter and Rectifier Filter 100 Device 100 Current Rectifier Vo- N Detection Fuse L Vo+ Y PWM Inrush Current 75 Line Controller Switching Limiter andOpto- Reference & 70 Rectifier Filter Device Current RectifierIsolation Error Amp. N Vo- Vout adj.Detection Y PWM Controller Opto- DC ONReference & Isolation (Green LED)Error Amp. Output Level Vout adj. Detection RDY(Open Collector)* *24V models only DC ON 0 0 (Green LED) Output Level -10 -10 61 71 61 71 Detection Temperature (C) Temperature (C) RDY(Open Collector)* *24V models only DPS-1-30-60/07/07 www.imopc.com Fuse L Vo+ Inrush Current Line Switching Limiter and Rectifier Filter Device Current Rectifier N Vo- Detection Y Control Opto- Reference & Isolation Error Amp. Vout adj. Opto- Over Voltage Isolation Detection DC ON (Green LED) Output Level Detection DC LOW (Red LED) 90 Power out (%) 90 Power out (%) Power out (%) 90 90 Power out (%) Power out (%)