1-A Dual-HBD (Dual-Half-Bridge Driver) TLE4207G Features Delivers up to 0.8 A continuous Optimized for DC motor management applications Very low current consumption in stand-by (Inhibit) mode Low saturation voltage typ.1.2 V total 25 C 0.4 A Output protected against short circuit Error flag diagnosis Overvoltage lockout and diagnosis PG-DSO-14 Undervoltage lockout CMOS/TTL compatible inputs with hysteresis No crossover current Internal clamp diodes Overtemperature protection with hysteresis and diagnosis Enhanced power PG-DSO-Package Green Product (RoHS compliant) AEC Qualified Type Ordering Code Package TLE4207G on request PG-DSO-14 Description The TLE4207G is a protected Dual-Half-Bridge-Driver designed specially for automotive and industrial motion control applications. The part is built using the Infineon bipolar high voltage power technology DOPL. The actuator (DC motor) can be connected direct between the halfbridges. Operation modes forward (cw), reverse (ccw), brake and high impedance are invoked from a standard interface. The standard enhanced power PG-DSO-14 package meets the application requirements and saves PCB-board space and costs. Furthermore the built in features like diagnosis, over- and undervoltage-lockout, short- circuit-protection, over-temperature-protection and the very low quiescent current in stand-by mode will open a wide range of automotive and industrial applications. Data Sheet 1 Rev. 1.3, 2018-07-02TLE4207G V 1 14 N.C. S OUT2 2 13 OUT1 GND 3 12 GND TLE GND 4 11 GND 4207G GND 5 10 GND IN2 6 9 IN1 INH 7 8 EF AEP02303 Figure 1 Pin Configuration (top view) Pin Definitions and Functions Pin No. Symbol Function PG-DSO-14 1 V Power supply voltage S positive reference potential for blocking capacitor 2OUT2 Power output 2 short circuit protected with integrated clamp diodes 3, 4, 5, GND Ground 10, 11, 12 negative reference potential for blocking capacitor 6IN2 Input channel 2 controls OUT2 (not inverted) 7INH Inhibit input low = IC in stand-by 8EF Error Flag output open collector low = error 9IN1 Input channel 1 controls OUT1 (not inverted) 13 OUT1 Power output 1 short circuit protected with integrated clamp diodes 14 N.C. Not connected Data Sheet 2 Rev. 1.3, 2018-07-02