IN-P18ATG Inolux

IN-P18ATG Top View SMD LED 1808 PLCC2 Features Description 1808 0.55mm SMD LED The IN-P18ATG is a popular low profile 1808 package High Brightness with versatile design capabilities. It is a PLCC type InGaN Technology silicone style LED which can be used in various Small package applications. High reliability Recommended Solder Pattern Applications Consumer Electronics Wearable Automobile After Market Industrial Equipment Figure 1. IN-P18ATG Solder Pattern Package Dimensions in mm Notes. 1. All dimensions are in millimeters. 2. Tolerance is 0.10 mm unless otherwise noted Figure 2. IN-P18ATG Package Dimensions Inolux Corporation May, 12, 2021 www.inolux-corp.com Proprietary & Confidential Page 1 IN-P18ATG Top View SMD LED 1808 PLCC2 o Absolute Maximum Rating at 25 C (Note 1) Emission o o P (mW) I (mA) I * (mA) V (V) Product d F FP R T ( C) T ( C) OP ST Color o o o o IN-P18ATG Green 25 100 5 -30 C~+85 C -40 C~+90 C 90 Notes 1. Condition for IFP is pulse of 1/10 duty and 0.1msec width ESD Precaution ATTENTION: Electrostatic Discharge (ESD) protection The symbol above denotes that ESD precaution is needed. ESD protection for GaP and AlGaAs based chips is necessary even though they are relatively safe in the presence of low static-electric discharge. Parts built with AlInGaP, GaN, or/and InGaN based chips are STATIC SENSITIVE devices. ESD precaution must be taken during design and assembly. If manual work or processing is needed, please ensure the device is adequately protected from ESD during the process. Please be advised that normal static precautions should be taken in the handling and assembly of this device to prevent damage or degradation which may be induced by electrostatic discharge (ESD). Inolux Corporation May, 12, 2021 www.inolux-corp.com Proprietary & Confidential Page 2