IN-S124BT series Top Mount SMD LED 1206 PCB Type Featured Description 1206 1.85mm SMD LED The IN-S124BT series is a popular 1206 package with High Brightness top mount and versatile design capabilities. It is a PCB AlInGaP / InGaN Technology type molding style LED which can be used in various Narrow View Angle applications. High Reliability Clear Lens Recommended Solder Pattern Applications Consumer Electronics Wearables Automobile After Market Industrial Equipment Figure 1. IN-S124BT Solder Pattern Package Dimensions in mm Notes. 1. All dimensions are in millimeters. 2. Tolerance is 0.10 mm unless otherwise noted Figure 2. IN-S124BT Package Dimensions Inolux Corporation October, 11, 2018 www.inolux-corp.com Proprietary & Confidential Page 1 IN-S124BT series Top Mount SMD LED 1206 PCB Type o Absolute Maximum Rating at 25 C (Note 1) Emission o o P (mW) I (mA) I * (mA) V (V) Product d F FP R TOP ( C) TST ( C) Color IN-S124BTYG Yellow Green IN-S124BTY Yellow 48 20 40 IN-S124BTA Amber o o o o IN-S124BTR Red 5 -40 C~+85 C -40 C~+100 C IN-S124BTB Blue IN-S124BTG Green 78 20 60 IN-S124BTW White Notes 1. Condition for IFP is pulse of 1/10 duty and 0.1msec width ESD Precaution ATTENTION: Electrostatic Discharge (ESD) protection The symbol above denotes that ESD precaution is needed. ESD protection for GaP and AlGaAs based chips is necessary even though they are relatively safe in the presence of low static-electric discharge. Parts built with AlInGaP, GaN, or/and InGaN based chips are STATIC SENSITIVE devices. ESD precaution must be taken during design and assembly. If manual work or processing is needed, please ensure the device is adequately protected from ESD during the process. Please be advised that normal static precautions should be taken in the handling and assembly of this device to prevent damage or degradation which may be induced by electrostatic discharge (ESD). Inolux Corporation October, 11, 2018 www.inolux-corp.com Proprietary & Confidential Page 2