Product Information

600-0550

600-0550 electronic component of Integrity

Datasheet
DRY WIPE, NON-STERILE, 16" X 15", 100PCS

Manufacturer: Integrity
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)

100: USD 0.5664 ea
Line Total: USD 56.64

0 - Global Stock
MOQ: 100  Multiples: 100
Pack Size: 100
Availability Price Quantity
0 - Global Stock


Ships to you between Fri. 05 Apr to Thu. 11 Apr

MOQ : 100
Multiples : 100

Stock Image

600-0550
Integrity

100 : USD 0.5664

     
Manufacturer
Product Category
Brand
Wipe Material
Wipe Width
Wipe Length
Svhc
LoadingGif

Notes:- Show Stocked Products With Similar Attributes.
Image Description
600-0420 electronic component of Integrity 600-0420

FOAM ROLLER, 458MM
Stock : 5

600-4003 electronic component of Integrity 600-4003

CONTROL MAT, 661MM X 1143MM, WHITE
Stock : 0

600-4004 electronic component of Integrity 600-4004

CONTROL MAT, 661MM X 1143MM, BLUE
Stock : 0

600-5005 electronic component of Integrity 600-5005

CLEAN ROOM DISPOSABLE LAB COAT, XX-LARGE
Stock : 0

600-5007 electronic component of Integrity 600-5007

CLEAN ROOM DISPOSABLE COVERALL, MEDIUM
Stock : 0

600-5004 electronic component of Integrity 600-5004

CLEAN ROOM DISPOSABLE LAB COAT, X-LARGE
Stock : 0

600-5001 electronic component of Integrity 600-5001

CLEAN ROOM DISPOSABLE LAB COAT, SMALL
Stock : 0

600-4002 electronic component of Integrity 600-4002

CONTROL MAT, 458MM X 1143MM, BLUE
Stock : 16

600-2008 electronic component of Integrity 600-2008

LINED NOTEBOOK, NON-STERILE, A4 SIZE
Stock : 0

600-0010 electronic component of Integrity 600-0010

PERFORATED ROLL, WHITE, 45 SHEET
Stock : 2

Image Description
8630 electronic component of Keystone 8630

Keystone Electronics Circuit Board Hardware - PCB BOARD GUIDE
Stock : 1

1447-1 electronic component of Keystone 1447-1

Keystone Electronics Circuit Board Hardware - PCB .080 SWAGE PIN .335"
Stock : 1

200-BLK electronic component of Abbatron 200-BLK

Conn Insulated Phone Tip Plug Assembly PL 1 POS ST Cable Mount 1 Port
Stock : 1

Hot 3231-2-00-34-00-00-08-0 electronic component of Mill-Max 3231-2-00-34-00-00-08-0

Circuit Board Hardware - PCB 50u AU OVER NI
Stock : 7

561-LMTP250 electronic component of Eagle Plastic 561-LMTP250

Circuit Board Hardware - PCB THREADED PC SPT 1/4"
Stock : 1

05.508.3121.0 electronic component of Wieland 05.508.3121.0

Conn Test Jack SKT 1 POS ST 1 Port
Stock : 1

561-MMP006 electronic component of Eagle Plastic 561-MMP006

Circuit Board Hardware - PCB 6mm MINI POST
Stock : 1

8649 electronic component of Keystone 8649

Keystone Electronics Circuit Board Hardware - PCB VERTICAL GUIDE
Stock : 91

Z5.553.3021.0 electronic component of Wieland Z5.553.3021.0

Conn Test Jack SKT 1 POS ST 1 Port
Stock : 1

Z5.553.2921.1 electronic component of Wieland Z5.553.2921.1

TEST PLUG ST 2 / 2,3 BLACK
Stock : 1

Technical Data Sheet integrity nonwoven Polyester/Cellulose wipes The Nonwoven Polyester/Cellulose is a hydroentangled 45% Polyester and 55% Cellulose nonwoven wiper designed for applications that require the unique combination of superior strength and exceptional sorbency. This wiper is a perfect wiping material for spill control and general purpose wiping. FEATURES APPLICATIONS Made of hydroentangled 45% Polyester and Recommended for use in class ISO6 55% Cellulose cleanroom environment Combines the strength of polyester with the General purpose wiping and polishing of absorbency of long cellulose fibres surface areas, including optics Cleanroom processed and packaged to Excellent for use in Pharmaceutical, Biotech reduce particles & medical device manufacturing markets Smooth, highly sorbent and durable Available in various sizes and packaging configurations Works well with IPA and other solvents Available sterile by Gamma Irradiation PERFORMANCE CHARACTERISTICS Basis Weight 68gsm Thickness (micrometer) 0.30mm Absorbency (IEST-RP-CC 004.3) 2 Sorptive capacity 288 ml/m Rate (Drop Disappearance mtd.) < 0.8 sec CONTAMINATION CHARACTERISTICS Nonvolatile Residue, NVR (IEST-RP-CC 004.3, Analysis for Unspecified Extractable Matter) IPA Extractant 0.431mg/g DIW Extractant 0.091mg/g /integrity eu /company/integrity-cleanroom Call +44 (0) 1473 836205 Email info integritycleanroom.com IMPORTANT NOTICE: This data sheet and its contents (the Information) belong to Integrity Cleanroom or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but Integrity Cleanroom assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where Integrity Cleanroom was aware of the possibility of such loss or damage arising) is excluded. Integrity Cleanroom. Pa Ge 1 nonwoven Poly Cell Dry wiPer 27 January 2015 5:28 PMTechnical Data Sheet FTIR NO Silicon Oil, Amide and DOP detected Ion Content (IEST-RP-CC 004.3, Thorough Extraction Method) ION Content (IEST-RP-CC 004.3, short term extraction) Sodium (Na) 0.0012mg/g Potassium (K) ND Magnesium (Mg) ND Calcium (Ca) ND Chloride (CI) 0.0500mg/g Sulphate (SO4) 0.0660mg/g RELEASABLE PARTICLES 6 2 LPC (>0.5um) 82.42 x 10 particles/m (IEST-RP-CC 004.3-orbital shake mtd) APC (Helmke Drum Test 10rpm) 300 counts/pc/cfm -9 x 9 >0.5um (IES-RP-CC003.2) 3 2 5.67 x 10 counts/m /cfm no Te: *Data shown are typical values and should not be used as specifications. ProDuCT C oDe SiZe QTy 600-0501 9x9 100 pack 600-0510 9x9 300 pack 600-0520 12x12 100 pack 600-0530 12x12 Sterile 100 pack 600-0550 16x15 100 pack /integrity eu /company/integrity-cleanroom Call +44 (0) 1473 836205 Email info integritycleanroom.com IMPORTANT NOTICE: This data sheet and its contents (the Information) belong to Integrity Cleanroom or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but Integrity Cleanroom assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where Integrity Cleanroom was aware of the possibility of such loss or damage arising) is excluded. Integrity Cleanroom. Pa Ge 2 nonwoven Poly Cell Dry wiPer 27 January 2015 5:28 PM

Tariff Desc

8547.90.00 9904140 SPACERS, INSULATED, having a maximum outside diameter of 8 mm

3926.90.90 Other articles of plastics and articles of other materials ---Other

7415 Nails, tacks, drawing pins, staples (other than those of 8305) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter-pins, washers (including spring washers) and similar articles, of copper:
7415.3 -Other threaded articles:
7415.33.00 --Screws; bolts and nuts
7415.39.00 --Other

8536.69.90 SOCKETS, being ANY of the following:
(a) single pin, NOT exceeding 3.5 mm;
(b) micro, single pin, 2 mm;
(c) DC power connector, 2.1 mm OR 2.5 mm;
(d) 9 pin OR 15 pin, sub D;
(e) 2, 4 OR 8 pole microphone connector;
(f) 2, 3, 5, 6, 7, 8 OR 13 pin DIN;
(g) 16, 20, 26, 34, 40 OR 50 way dual in line crimp-on
Op. 04.02.1999 Dec. 23.04.1999 - TC 9900883"

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON ELECTRONICS
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronic Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing.
All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted