X-On Electronics has gained recognition as a prominent supplier of 600-3003 PPE Safety Equipment / Lockout Tagout across the USA, India, Europe, Australia, and various other global locations. 600-3003 PPE Safety Equipment / Lockout Tagout are a product manufactured by Integrity. We provide cost-effective solutions for PPE Safety Equipment / Lockout Tagout, ensuring timely deliveries around the world.
We are delighted to provide the 600-3003 from our PPE Safety Equipment / Lockout Tagout category, at competitive rates not only in the United States, Australia, and India, but also across Europe and beyond. A long established and extensive electronic component distribution network has enhanced our global reach and dependability, ensuring cost savings through prompt deliveries worldwide. Client satisfaction is at the heart of our business, where every component counts and every customer matters. Our technical service team is ready to assist you. From product selection to after-sales support, we strive to deliver a seamless and satisfying experience. Are you ready to experience the best in electronic component distribution? Contact X-ON Electronics today and discover why X-On are a preferred choice for the 600-3003 and other electronic components in the PPE Safety Equipment / Lockout Tagout category and beyond.
Technical Data Sheet Integrity cleanroom 3 Ply t ie on Facemask FEATURES AND BENEFITS Cleanroom processed and packaged to reduce particles Masks material is made up of combined polymer ES which is lint free and hypoallergenic-soft surface layers that prevents skin irritation and allergy problems Solvent-safe, cleanroom double-bagged packaging Ultrasonic bonding ensures a cleaner mask by reducing contamination & outgassing Extra wide (210mm ) provides maximum facial coverage and reduces exposed skin Tie-on has greater flexibility of adjustment SPECIFICATIONS Mask dimension is available in 180 mm x 90 mm 210 mm x 90 mm oUter F acIaL Layer Combined Polymer ES - 17 gsm FILter center Layer Meltblown Polypropylene -18 gsm Inner F acIaL Layer Combined Polymer ES - 17 gsm nose PIece Metal stripped with coating tIe- on materIaL Combined Polymer ES MASK MATERIAL CHARACTERISTICS test resUL t BACTERIAL FILTRATION EFFICIENCY (BFE) (3.0UM) (ASTM F 2102) 95.10% PARTICLE FILTRATION EFFICIENCY (PFE) (0.1um) (ASTM F 2299) 97.60% AIRBORNE PARTICLE COUNT (HELMKE DRUM) (>0.5um) (IEST-RP-CC003.2) 70 counts/pc./cfm PLEASE NOTE Data shown are typical values and should not be used as specifications. ProDUct coDe Pack QU antIty 600-3003 50 600-3005 20 Sterile /integrity eu /company/integrity-cleanroom Call +44 (0) 1473 836205 Email info integritycleanroom.com IMPORTANT NOTICE: This data sheet and its contents (the Information) belong to the Integrity or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Integrity assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Integrity was aware of the possibility of such loss or damage arising) is excluded. Integrity. Page 1 IntegrIty mask tIe on 4 December 2014 2:00 P mX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for integrity manufacturer: Other Similar products are found below : 600-5050 600-3033 600-4002 600-4001 600-0520 600-0230 600-0420 600-0220 600-4003 600-0501 600-0660 600-0530 600-5008 600- 0010 600-0012