EPCQ-L Serial Configuration Devices Datasheet 2015.12.14 Send Feedback CF52013 Subscribe This datasheet describes low-voltage quad-serial configuration (EPCQ-L) devices for Arria 10 devices. Supported Devices The following table lists the supported Altera EPCQ-L devices. Table 1: Altera EPCQ-L Devices Device Memory Size On-Chip ISP Cascading Reprogram Recommende Number (2) (bits) Decompres Support Support mable d Operating of Die sion Voltage (V) (256MB) (1) Support EPCQ-L256 268,435,456 No Yes No Yes 1.8 1 EPCQ-L512 536,870,912 No Yes No Yes 1.8 2 EPCQ-L1024 1,073,741,824 No Yes No Yes 1.8 4 Features EPCQ-L devices offer the following features: Compatibility with Arria 10 FPGAs and SOCs Native support for active serial (AS) x4 Backward compatibility for AS x1 on Arria 10 devices Low pin count and non-volatile memory 1.8-V operation Stacked die device Manufactured on NOR technology Available in FBGA24 package Reprogrammable memory with more than 100,000 erase or program cycles Write protection support for memory sectors using status register bits Fast read and extended quad input fast read of the entire memory using a single operation code (1) EPCQ-L devices are compatible with decompression built into Arria 10 devices. (2) Multiple EPCQ-L devices may be used on a single FPGA device. 2015 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, ENPIRION, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as ISO trademarks or service marks are the property of their respective holders as described at www.altera.com/common/legal.html. Altera warrants performance 9001:2008 of its semiconductor products to current specifications in accordance with Altera s standard warranty, but reserves the right to make changes to any Registered products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information, product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device specifications before relying on any published information and before placing orders for products or services. www.altera.com 101 Innovation Drive, San Jose, CA 95134CF52013 2 Operating Conditions 2015.12.14 Write bytes and extended quad input fast write bytes of the entire memory using a single operation code In-system programming (ISP) support with the SRunner software driver ISP support with USB-Blaster II, USB-Blaster, EthernetBlaster II, or EthernetBlaster download cables By default, the memory array is erased and the bits are set to 1 During user mode, you can use the ALTASMI PARALLEL IP core to access the EPCQ-L device Warning: EPCQ-L devices are only compatible with Arria 10 devices. Operating Conditions This section covers information about the absolute maximum ratings, recommended operating conditions, DC operating conditions, ICC supply current, and capacitance for EPCQ-L devices. Absolute Maximum Ratings Table 2: Absolute Maximum Ratings Symbol Parameter Condition Min Max Unit V Supply voltage With respect 0.6 2.4 V CC to GND (3) (4) V , DC input/ With respect 0.6 V + 0.6 V IO CC output voltage to GND T Storage No bias 65 150 C STG temperature Recommended Operating Conditions Table 3: Recommended Operating Conditions Symbol Parameter Condition Min Max Unit (5) V Supply voltage 1.7 2.0 V CC V Input voltage With respect to GND 0.5 0.4 + V I V CC (6) T Operating temperature For industrial use 40 85 C A t Input rise time 5 ns R (3) During signal transitions, minimum voltage may undershoot to 1V for periods less than 10 ns. (4) During signal transitions, maximum voltage may overshoot to V + 1V for periods less than 10 ns. CC (5) The maximum V rise time is 100 ms. CC (6) EPCQ-L devices can be paired with Altera industrial-grade FPGAs operating at junction temperatures up to 100C as long as the ambient temperature for the EPCQ-L device does not exceed 85C. EPCQ-L Serial Configuration Devices Datasheet Altera Corporation Send Feedback