Introduction ZIF Connectors DL DL Product Introduction he Cannon DL Series of Zero Insertion Force (ZIF) connectors fill the need in the Tmedical, commercial/industrial, computer and peripheral equipment market places for low-cost, high performance multiple-wire power and signal connectors. DL connectors feature: a minimum rated life of 10,000 complete mating and unmating cycles with no performance loss can be mated and unmated in less than two seconds even with as many as 2496 contacts and they cost less (often as much as 25% less) per mated line than singular high- density rack-and-panel connectors. Simple. Effective. Reliable. Durable. Combining their special design with commercial- grade materials and low cost crimp, PCB and wrappable hermaphroditic contacts, that may be hand or machine terminated, makes the DL Series of ZIF connectors the finest low-cost-per-mated- line I/0 connectors available today. Materials and Finishes DL1/2/3 Housing Glass filled thermoplastic, UL 94V-1 rated, Color: Black DL5 Housing Glass filled thermoplastic, UL 94V-0 rated, Color: Black Crimp Contact* Copper alloy, 50 inches gold over 50 inches nickel in mating area, gold flash on balance Copper alloy, 20 inches gold over 50 inches nickel in mating area, tin lead on balance Square Post Contact Copper alloy, 50 inches gold over 50 inches nickel in mating area, gold flash on balance Copper alloy, 20 inches gold over 50 inches nickel in mating area, gold flash on balance Actuating Camshaft Stainless steel, Passivated Insulator Retainer (Plug Only) Stainless steel, Passivated *Order crimp contacts separately, see pages 52-53. Dimensions are shown in mm (inch) Dimensions subject to change 4DL1, DLM1, DLD1 ZIF Connectors DL1 DL1 Plastic Body 156 Pin Connectors Crimp Contacts Plug 108,00 (4.255) 100,03 (3.938) 16,26 (.640) 92,26 (3.631) 4X 3,03 (.119) 24,90 (.980) 7,92 (.312) For contact cavity arrangement, see page 68. For panel cutout and mounting hole pattern, 23,10 see page 65. (.910) Crimp contacts are to be ordered separately and installed by customer, see pages 52-53. Order actuating handle kit separately, 6,35 (.250) see page 47. 54,81 (2.158) CAMSHAFT TURNING DIRECTION 20,10 (.792) Part Number Nomenclature 110535-0000 DL1-156P 92,10 (3.626) Receptacle 108,00 (4.255) 100,03 (3.938) 16,26 (.640) 92,00 (3.622) 4X 3,03 (.119) 24,90 (.980) For contact cavity arrangement, see page 68. 7,75 (.305) For panel cutout and mounting hole pattern, see page 65. Crimp contacts are to be ordered separately and installed by customer, see pages 52-53. 20,32 (.800) 6,35 (.250) 20,10 (.792) 92,10 (3.626) Part Number Nomenclature 086-0030-000 DL1-156R Dimensions are shown in mm (inch) Dimensions subject to change 14