CA3101R32-7P ITT

Datasheet for part number CA3101R32-7P Our Catalog Part Number: CA3101R32-7P Brand: Cannon Product Category: Circular Product Line: MIL-DTL 5015 Series I Series: MIL-C-5015 Product Datasheet Thread Connector with threaded coupling Shell Style Cable connecting plug Endbell Style Shortened light-weight endbell without cable clamp Gender Pin Shell Size 32 Contact Arrangement 32-7 Number of contacts 7 contacts size 12, 28 contacts size 16 Contact Type Solder Cup Contact Plating Hard silver Contacts installed yes Shielding no Contact Rating at +20 C (68 F) 22 A (Size 15/15S/16/16S) Contact Rating at +20 C (68 F) 41 A (Size 25/12) Contact Resistance 6 m (Size 15/15S/16/16S) Contact Resistance (Size 25/12) 3 m In case of voltages greater than 50V the connector Operating Voltage must be used in accordance with DIN VDE part 410, IEC 60364-4-41. Acc. To VG95319, part 2, test no. 5.12 Insulator Resistance and VG95210, part 32, test conditions B, standard insulator material > 1000 M Test Voltage 1050 Vrms Air and Creepage Paths (Min) 0,7 mm Standard insulator material -55/+125C Ambient Temperature (-67/257F) Safety Provisions IP65 acc. to DIN 40 050 Salt Spray Resistance 500 hours salt spray resistant Mating Cycles 500 min Sep. Force per Contact 1,0 N (Size 15/15S/16/16S) Sep. Force per Contact (Size 25/12) 1,5 N For infos on Gage please see catalog Gage VG95234, part 1 Coupling Torque Closing: 19 Nm max / Opening: 1,03 Nm min Contact Retention 35 N (Size 15/15S/16/16S) Contact Retention (Size 25/12) 55 N Shell Material Aluminium alloy Shell Plating Olive drab chromate coating over cadmium plating Insulator and Gromet Material Neoprene Contact Material Copper alloy Harnessing Info: Contact Cross-Section See assembly instruction Harnessing Info: Insulator Diameter See assembly instruction Wire Stripping 6,2 mm (Size 15/15S/16/16S) Specifications and dimensions subject to change. Page 1 of 2 Datasheet for part number CA3101R32-7P Our Catalog Part Number: CA3101R32-7P Brand: Cannon Product Category: Circular Product Line: MIL-DTL 5015 Series I Series: MIL-C-5015 Product Datasheet Wire Stripping (Size 25/12) 6,2 mm All tests in accordance with VG95319 and/or if General Info applicable with VG95210 Specifications and dimensions subject to change. Page 2 of 2