ca D1-D102:Layout 1 2/10/11 11:51 AM Page 1ca D1-D102:Layout 1 2/10/11 11:52 AM Page 60 Microstrips .050 Contact Spacing MT The Cannon Microstrips provide an extremely dense and reliable interconnection solution in a minimum prole package, giving great application exibility. Available with latches or guide pins, Microstrips are frequently found in board-to-wire applications where high reli- ability is a primary concern. Three termination styles are available: solder cup, pigtail, harness, or printed circuit leads. The MicroPin Contact System assures maxi- mum performance in a minimum package. Product Features High Performance MicroPin Contact System MicroPin Contact System WIRE High-density .050 contact spacing SLEEVE Pre-wired for ease of installation The Cannon MicroPin Contact System offers Fully potted wire terminations uncompromised performance in downsized Guide pins for alignment and polarizing interconnects. The beryllium copper pin contact is WIRE CRIMP Quick-disconnect latches fully recessed in the insulator, assuring positive 3 Amp current rating contact alignment and robust performance. The Precision crimp terminations socket contact is precision machined from high Solder cup, pigtail or printed circuit terminations strength copper alloy and features a smooth lead-in Surface mount leads chamfer. The MicroPin features seven points of electrical contact. This contact system assures high normal force, excellent wipe and superior shock and vibration performance. Specications Current Rating 3 Amps max Dielectric Withstanding Voltage 900 VAC sea level 300 VAC 70,000 feet altitude D Insulation Resistance 5000 megohms min. Contact Resistance 8 milliohms max. Operating Temperature MTV polyester -56C to +125C MTB diallyl phthalate -55C to +150C Durability 500 cycles min. Shock/Vibration 50 Gs/20 Gs Connector Mating Force (8 oz.) x ( of contacts) Latch Retention 5 lbs. min. Wire Size 26 AWG insulated wire, 25 AWG uninsulated solid wire. MT strips will also accommodate 24 AWG through 32 AWG. For other wiring options contact the factory for ordering information. General Performance requirements in accordance with MIL-DTL-83513 Specications Insulator MTV: Glass-lled polyester per MIL-M-24519 MTB: Glass-lled diallyl phthalate per MIL-M-14 Contact Copper Alloy per MIL-C-83513 Contact Finish 50 Microinches Min. Gold Plated per MIL-G-45204 Insulated Wire 26 AWG. 19/38 Stranded, silver-plated copper, TFE Teon insulation per MIL-W-16878/4 Uninsulated Solid Wire 25 AWG gold-plated copper per QQ-W-343 Potting Material/Contact Encapsulant Epoxy Latch 300 series stainless steel, passivated Dimensions shown in inches (mm) Specications and dimensions subject to change www.ittcannon.com D-60 Microminiature