PLA110L Single Pole, Normally Open OptoMOS Relay INTEGRATED CIRCUITS DIVISION Description Parameter Ratings Units Blocking Voltage 400 V PLA110L is a current-limited, normally open P Load Current 150 mA / mA (1-Form-A) solid state relay that uses optically rms DC coupled MOSFET technology to provide 3750V of On-Resistance (max) 25 rms input to output isolation. Its optically coupled outputs, which use the patented OptoMOS architecture, are controlled by a highly Features efficient GaAIAs infrared LED. Current Limiting 3750V Input/Output Isolation The PLA110L can be used to replace mechanical rms Low Drive Power Requirements (TTL/CMOS relays. It offers the superior reliability associated Compatible) with semiconductor devices, it has no moving parts, No Moving Parts and it offers faster, bounce-free switching in a more High Reliability compact surface mount or thru-hole package. Arc-Free With No Snubbing Circuits No EMI/RFI Generation Approvals Small 6-Pin Package UL Recognized Component: File E76270 Machine Insertable, Wave Solderable CSA Certified Component: Certificate 1175739 Surface Mount and Tape & Reel Version Available EN/IEC 60950-1 Certified Component: TUV Certificate B 09 07 49410 004 Applications Ordering Information Telecommunications Part Description Telecom Switching PLA110L 6-Pin Dip (50/Tube) Tip/Ring Circuits PLA110LS 6-Pin Surface Mount (50/Tube) Modem Switching (Laptop, Notebook, Pocket PLA110LSTR 6-Pin Surface Mount (1000/Reel) Size) Hook Switch Pin Configuration Dial Pulsing AC/DC Configuration Ground Start 1 6 Ringing Injection + Control Load 2 5 Instrumentation Control Do Not Use Multiplexers 3 4 NC Load Data Acquisition Electronic Switching DC Only Configuration I/O Subsystems 1 6 + Control + Load Meters (Watt-Hour, Water, Gas) 2 5 Control Load Medical Equipment-Patient/Equipment Isolation 3 4 NC Security Aerospace Industrial Controls Switching Characteristics of Normally Open Devices Form-A I F 90% 10% I LOAD t t on off Pb e3 DS-PLA110L-R05 1 www.ixysic.comPLA110L INTEGRATED CIRCUITS DIVISION Absolute Maximum Ratings 25C Absolute Maximum Ratings are stress ratings. Stresses in Parameter Ratings Units excess of these ratings can cause permanent damage to the Blocking Voltage 400 V P device. Functional operation of the device at conditions beyond Reverse Input Voltage 5 V those indicated in the operational sections of this data sheet is Input Control Current 50 mA not implied. Peak (10ms) 1 A 1 Input Power Dissipation 150 mW 2 Total Power Dissipation 800 mW Isolation Voltage Input to Output 3750 V rms Operational Temperature -40 to +85 C Storage Temperature -40 to +125 C 1 Derate linearly 1.33 mW / C 2 Derate linearly 6.67 mW / C Electrical Characteristics 25C Parameter Conditions Symbol Min Typ Max Units Output Characteristics Load Current, Continuous AC/DC Configuration - - 150 mA / mA rms DC -I L DC Configuration - - 250 mA DC Peak 10ms I --- mA LPK On-Resistance AC/DC Configuration I =150mA -- 25 L R ON DC Configuration I =250mA - - 9 L Off-State Leakage Current V =400V I --- A L P LEAK Switching Speeds Turn-On t -- 1 ms on I =5mA, V =10V F L Turn-Off t - - 0.25 ms off Output Capacitance V =50V, f=1MHz C -25- pF L OUT Load Current Limiting - I 190 235 280 mA CL Input Characteristics Input Control Current to Activate I =150mA I -- 5 mA L F Input Control Current to Deactivate - I 0.4 0.7 - mA F Input Voltage Drop I =5mA V 0.9 1.2 1.4 V F F Reverse Input Current V =5V I - - 10 A R R Common Characteristics Input to Output Capacitance - C -3- pF I/O R05 2 www.ixysic.com