COMPONENTS PRODUCT INFORMATION TM CONNECTOR microSD Small Memory Card Connector NEW MB-0195-3 ST1- G / T Series January 2012 RoHS Compliant Images of Type G TM The ST1 Series is a one-piece type connector for microSD memory cards. It is a low-profile, high-density, SMT mounted connector which is compatible with the TM microSD card used in a variety of portable devices and standardized by the SDA ( SD Card Association). TM * microSD is a trademark of SD Card Association. Features TM Push-slide, hinge type connector for microSD small memory card. Available with card insertion detection switch (T type), and without (G type). Shield feature is secured by 4 ground connection points on hinge cover. Slim design with 1.4mm height, 15.5mm depth, 11.9mm width. Lock structure to prevent the cover from opening when dropped. General Specifications No. of Contacts: 8 position Rated Current: 0.5A per pin Contact Resistance: 100m ohm max. Rated Voltage: 10V per pin Dielectric Withstanding Voltage : Insulation Resistance: 1,000M ohm min. AC500Vr.m.s. per minute Lifetime: 10,000 insertions Operating Temperature: Temperature Rise: 30 Deg. C rise max. -25 Deg. C to +85 Deg. C Storage Temperature: -10 Deg. C to +60 Deg. C 1/4 JAE PMK Div. Proprietary. Copyright 2012Japan Aviation Electronics Industry, Ltd.MB-0195-3 Materials and Finishes Component Material / Finish Copper alloy / Contact Contact Area: 0.5 m min. Au plating over Ni Terminal Area: Au flash plating over Ni Housing Synthetic resin / None Cover Stainless steel / None (Terminal Area: same as contact) Ordering Information ST1 W 008 S 4 T (R2000) Series Reel Part Number (Note) Connector Type W: Hinge Type Modification Code T: With Small D-SW G: Without Small D-SW No. of Contacts 4: Au 0.5 m / Au Flash Plating S: Socket Contact 2/4 JAE PMK Div. Proprietary. Copyright 2012Japan Aviation Electronics Industry, Ltd.