High Frequency Ceramic Solutions Atmel AT86RF215 868/915/928 MHz Impedance Matched Balun + LPF P/N: 0896BM15E0025 (FCC/ETSI compliant) integrated Passive Component 4/23/2018 Detail Specification: Page 1 of 5 For the 2.4G Balun-filter, go to: www.johansontechnology.com/atmel General Specifications Part Number 0896BM15E0025 863-928 Frequency (MHz) 50 Unbalanced Impedance Conjugate match to Atmel s AT86RF215, Balanced Impedance AT86RF215M, AT86RF215IQ chipsets Power Capacity 1W max. CW Recommended Storage +5 to +35 C Conditions for unused T&R Humidity 45 - 75%RH product 18 months max Quantity/Reel 4,000 pcs Electrical Specifications Operating Temperature -40C to +85C +85C to +125C 1.25dB Typ. (1.6dB max.) 1.5dB Typ. (1.8dB max.) Insertion Loss 9.5dB min. 9.5dB min. Return Loss 18010 18010 Phase Balance 2.0 max. 2.0 max. Amplitude DIfference 40Typ. 30 min. 1726~1856 MHz 40Typ. 30 min. 1726~1856 MHz 45Typ. 34 min. 2589~2784 MHz 45Typ. 34 min. 2589~2784 MHz 45Typ. 42 min. 3452~3712 MHz 45Typ. 42 min. 3452~3712 MHz Attenuation 45Typ. 34 min. 4315~4640 MHz 45Typ. 34 min. 4315~4640 MHz 54Typ. 31 min. 5178~5568 MHz 54Typ. 31 min. 5178~5568 MHz Part Number Explanation Bulk Suffix = S eg. 0896BM15E0025S P/N Suffix Packing Style T & R Suffix = E eg. 0896BM15E0025E 100% Tin Suffix = None eg. 0896BM15E0025(E or S) Mechanical Dimensions Terminal Configuration Function Function In mm No. No. Unbalanced Port L 0.079 0.004 2.00 0.10 1 4 Balanced Port W W 0.049 0.004 1.25 0.10 2 GND 5 GND c T 0.037 0.004 0.95 0.10 3 Balanced Port 6 GND L a 0.012 0.004 0.30 0.10 p a b 0.008 0.004 0.20 0.10 c 0.012 +.004/-.008 0.30 +0.1/-0.2 T g 0.014 0.004 0.35 0.10 g b 0.026 0.002 0.65 0.05 p Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate Camarillo, CA 93012 TEL 805.389.1166 FAX 805.389.1821 Ver. 2.0 2018 Johanson Technology, Inc. All Rights ReservedHigh Frequency Ceramic Solutions Atmel AT86RF215 868/915/928 MHz Impedance Matched Balun + LPF P/N: 0896BM15E0025 (FCC/ETSI compliant) integrated Passive Component 4/23/2018 Detail Specification: Page 2 of 5 Pad-Soldermask Guidelines 0.77 Solder Resist 0.35 Land 9.5dB min. 0.30 GND via ( 0.35) * Vias are important for proper harmonic 0.5 GND GND * Line width should be designed to match 50ohm characteristic impedance, depending on PCB material and thickness. Grounded CPWG is recommended. Schematic and layout file download: www.johansontechnology.com/atmel Measurement Diagram Port 2* Port 3* Network Port 1:Unbalanced Port Analyzer** Ports 2 and 3: Balanced Port IL=Sds21 Port 1(50 ) RL=Sss11 Amp diff = dB(S(2,1)/S(3,1)) GND Phase diff = Phase(S(2,1)/S(3,1)) GND GND *Impedance for ports 2 and 3 = Balanced Impedance/2 **E5071B from Agilent Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate Camarillo, CA 93012 TEL 805.389.1166 FAX 805.389.1821 Ver. 2.0 2018 Johanson Technology, Inc. All Rights Reserved