0915AT43A0026E Johanson

High Frequency Ceramic Solutions AEC-Q200 Qualification Available 915 MHz ISM Antenna for small form factor applications P/N 0915AT43A0026 Page 1 of 7 Detail Specification: 2/11/2021 Let us help you with the antenna design, optimization, and tuning General Specifications Part Number 0915AT43A0026 High Frequency Ceramic Solutions 915 MHz ISM Antenna for small form factor applications P/N 0915AT43A0026 Page 2 of 7 Detail Specification: 2/11/2021 Mounting Considerations I Mount these devices with maroon 1.0 8.0 mark facing up. *Line width should be GND Plane designed to provide 50 impedance 5.5 1.0 1.0 matching characteristics. 10 nH 2.0 Matching circuit**: * See Note 2 below 4.7 nH 0.5 pF 0.5 JTI P/N for Matching Circuit:** GND Plane Inductor (4.7nH):L-07C4N7SV6T 5.0 Inductor (10nH): L-07C10NJV6T Cap (0.5pF): 500R07S0R5BV4T 2.5 All units in: mm Johanson Test Board (orderable) 7.0 p/n: 0915AT43A0026-EB1SMA 9.5 40 50 Feed Line (make sure proper GND Vias calculation are applied to achieve this. Yellow area- GND Plane complete GND and layer clearance free of metal below and above. 19 (can be shortened as needed, won t influence performance) **Note 2: It is recommended that the designer leave available slots for ap (or shunt-series-shunt) network. The antenna matching network values above are used when antenna is mounted on Johanson s evaluation board. The matching values on clients PCB will be different, depending on the layout, thickness, material, etc. Go to: