Technical Service Department, JSP Ltd., Worsham Mill, Minster TECHNICAL Lovell, Oxford, OX29 0TA Tel.: 01993 824000 SPECIFICATION Fax: 01993 824422 113 MOULDED DISPOSABLE DUST MASK Meets the FFP1 requirements of EN 149. Conformity: EC Type Examination Certificate Number 73057, issued by BSi Product Certification, in accordance with the PPE Directive 89/686/EEC. Offers an assigned protection factor (APF) of 4 x Occupational Performance: Exposure Standard (OES) for fine non-toxic dusts, fibres, fumes and mists. Materials: Man made fibres Polystyrene exhalation valve with rubber diaphragm Instructions For Use: Mask must be fitted in accordance with the instructions supplied. Care must be taken to ensure that the correct mask type is selected for the work to be carried out. If in doubt as to the type of mask required seek professional advice. Cleaning & Not applicable - disposable product. Maintenance: Store the masks out of direct sunlight away from chemicals and in a dry atmosphere. The mask, when in contact with the skin may cause allergic reactions Limitations Of Use: to susceptible individuals. If this occurs leave the hazard area, remove mask and seek medical advice. Protection will only be offered if the mask is fitted correctly. The mask is not designed to be worn by people with facial hair. Manufacturing For Safety Page 1 of 1 THE INFORMATION IN THIS DOCUMENT IS CORRECT AS OF PRINT DATE X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for jsp manufacturer: Other Similar products are found below : PKC040-010-000