JWPS CONNECTOR 4.0mm pitch/Disconnectable Crimp style connectors Specifications Current rating: 4 A AC, DC (AWG 22) : 5 A AC, DC (AWG 20) : 6 A AC, DC (AWG 18) Voltage rating: 300 V AC, DC Temperature range: -55C to +85C (including temperature rise in applying electrical current) Applicable wire: Conductor size/ AWG 22 to 18 Insulation O.D./ 1.75 to 2.5 mm Applicable PC board thickness: 1.6 mm Waterproof grade: Grade 7 ingress protection of JIS C 0920 (IPX7 of IEC 60529 ) (*Since the waterproof performance is not This JWPS connector can be used for the available at the opposite side of mating place of which especially waterproof is entrance, waterproof treatment is required, required. if necessary.) This is the wire-to-board connector that is grade 7 ingress protection of JIS C 0920 * Refer toGeneral Instruction and Notice when using (IPX7 of IEC 60529). Terminals and Connector at the end of this catalog. * Contact JST for details. Waterproof performance * Compliant with RoHS. Contained seal ring Solid rubber seal Standards Double-spring construction 0 Recognized E60389 Housing-to-terminal locks Certified LR20812 Mis-mating prevention key 4 4 2 2 Note: 1. The above figure is the figure viewed from the connector mounting side. Note: 2. Hole dimensions differ according to the type of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details 1JWPS CONNECTOR Receptacle contact Applicable wire Qty / Insulation O.D. Model No. (mm) reel SJWPSR-21T-P1.0 Material and Finish Copper alloy, tin-plated RoHS compliance MKS-L MK/SJWPSR/T-21-10 APLMK SJWPSR/T21-10 AP-K2N SJWPSR-21T-P1.0 Receptacle housing assembly Circuits Keying Model No. Qty / box X 04R-JWPS-VKLE-DX-A 400 4 Y 04R-JWPS-VSLE-DY-A 400 Z 04R-JWPS-VELE-DZ-A 400 Material Receptacle housing: Glass-filled PBT, UL94V-0, X keying (black), Y keying (natural), Z keying (blue) Retainer: PBT, UL94V-0, purple Seal rubber plate: Silicone rubber, light blue RoHS compliance Note: Seal rubber plate and retainer are preassembled in receptacle housing assembly. 3 1 Header housing assembly Circuits Keying Model No. Qty / box X S04B-JWPS-KKS-XR 160 4 Y S04B-JWPS-KSS-YR 160 Z S04B-JWPS-KES-ZR 160 Material and Finish Header housing: Glass-filled PBT, UL94V-0, black Seal ring holder: Glass-filled PBT, UL94V-0, X keying (black), Y keying (natural), Z keying (blue) Seal ring: Silicone rubber, brown Tab contact: Copper alloy, tin-plated RoHS compliance This product displays (LF)(SN) on a label. Note: Seal ring and seal ring holder are preassembled in header housing assembly. 3 1 2 X x