1 2 3 H J S T Emboss Tape BH CONNECTOR BH CONNECTOR 4.0/8.0/12.0 mm pitch/Disconnectable Crimp style connectors Specifications Current rating: 1.0 A AC/DC (AWG 22) Voltage rating: 600 V AC/DC BH CONNECTOR BH CONNECTOR Temperature range: -25 to +85 (including temperature rise in applying electrical current) Contact resistance: Initial value/ 10 m max. After environmental tests/ 20 m max. Insulation resistance: 1,000 M min. Withstanding voltage: 1,800 VAC/minute Applicable wire: AWG 28 to 22 Low profile connectors with high withstanding voltage, designed for * In using the products, refer toHandling Precautions for Terminals connecting liquid crystal display back light and Connector described on our website (Technical documents of Product information page). lamps to their starters. * RoHS2 compliance * Dimensional unit: mm Low profile * Contact JST for details. SMT configuration Applicable to special wires Standards Headers with locating bosses Recognized E60389 Housing lock also serves as polarizing device Certified LR20812 PC board layout (viewed from component side) SMT type 21 16 17 (2 circuits 4 mm pitch) (2 circuits 8 mm17 pitch) (2 circuits 8 mm pitch with bosses) (2 circuits 8 mm pitch plugged up) 0.1 12 2-4 0.1 0.1 0.1 4 8 0.1 0.1 8 2 8 1 min. 1 min. 0.1 1 min. 1 min. 0.90 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 1.5 1.7 1.5 1.7 1.5 1.7 1.5 1.7 (3 circuits 4 mm pitch plugged up) (2 circuits 12 mm pitch) (3 circuits 4 mm pitch) 0.1 2-12 0.1 0.1 12 12 8 19 0.1 0.1 18 4 1 min. 4 19-2 1 min. 1 min. 0.1 0.1 0.1 0.1 1.5 1.7 1.5 1.7 0.1 0.1 1.5 1.7 (4 circuits 4 mm pitch) (4 circuits 4 mm pitch with post removed) Through-hole type 4-4 4-4 0.1 0.1 12 24 16 20 22 0.05 1 min. 1 min. 12 0.1 0.05 0.05 2 0.7 0 8 0.1 0.9 0 0.1 0.1 4 4 0.1 0.1 0.1 0.1 1.5 1.7 1.5 1.7 Note: 1. Tolerances are for pattern non-cumulative: 0.05 mm for all centers. Tolerance for hole size is 0.1. 2. Hole dimensions differ according to the type of PC board and piercing method. The dimensions above should serve as guideline. Contact JST for details. 1 H J S T 0.1 0.1 3.4 3.4 0.1 3.4 0.2 0.2 0.2 0.1 6.4 9 min. 0.1 0.1 6.4 6.4 0.1 3.4 9 min. 9 min. 0.2 0.1 3.4 0.1 3.4 0.2 0.2 0.1 6.4 9 min. 0.1 3.4 0.2 0.1 6.4 9 min. 0.1 6.4 9 min. 0.1 1.4 0.1 0.1 6.4 3.4 9 min. 0.05 1.85 0.2 0.1 3.4 0.2 0.1 6.4 0.1 9 min. 6.4 9 min.Emboss TapeEmboss Tape BHBH CONNECTORCONNECTOR BH CONNECTORBH CONNECTOR 4.0/8.0/12.0 mm pitch/Disconnectable Crimp style connectors4.0/8.0/12.0 mm pitch/Disconnectable Crimp style connectors BH CONNECTORBH CONNECTOR BH CONNECTORBH CONNECTOR Contact Applicable wire Q ty/ Model No. Insulation O.D. (mm) 2 reel mm AWG 0.080.33 2822 1.6 2.4 4,000 SBH-001T-P0.5 Material and Finish 7.35 2.2 1.5 3.1 Phosphor bronze, tin-plated (reow treatment) 1.5 RoHS2 compliance Note: Wire conductors should be tin-plated annealed copper strands. Applicator Crimping Contact machine Crimp applicator Dies Crimp applicator with dies AP-K2N MKS-L MK/SBH/M-001-05 APLMK SBH/M001-05 SBH-001T-P0.5 Note: Contact JST for fully automatic crimping applicator. Housing Dimensions (mm) No. of Pitch Q ty/ Model No. 2 to 4 circuits circuits bag (mm) A B B 4 4.0 9.8 1,000 BHR-02VS-1 A 3.2 8 8.0 13.8 1,000 BHR-03VS-1 2 Note1) 8 8.0 13.8 1,000 BHR-02(8.0)VS-1N 12 12.0 17.8 1,000 BHR-04VS-1 4 8.0 13.8 1,000 BHR-03VS-1 3 Note2) 4 BHR-03(4-3)VS-1N 12.0 17.8 1,000 4 4 BHR-04VS-1 12.0 17.8 1,000 5 4 BHR-05VS-1 16.0 21.8 1,000 4 2.2 Material and Finish 5 circuits 21.8 3.2 PA 66, UL94V-0, natural (white) RoHS2 compliance Note: 1. BHR-02(8.0)VS-1N: 2 circuits 8.0 mm pitch plugged up. 2. BHR-03(4-3)VS-1N: 4 circuits 4.0 mm pitch header with circuit No.3 plugged up. 4 2.2 16 18.4 19.6 Through-hole type shrouded header No. of circuits Pitch (mm) Model No. Q ty/tray 2 8 S02(8.0)B-BHS 1,000 14 10.4 Material and Finish 7.1 1 3 Post: Copper alloy, copper-undercoated, tin-plated (reow treatment) Wafer: PA, UL94V-0, natural (ivory) RoHS2 compliance This product displays (LF)(SN) on a label. Note: The applicable housing isBHR-02(8.0)VS-1 only. 8 12 6.85 2 3.2 5.1 1.6 8.8 5.1 8.8 (3.2) H JST H JST