ZM CONNECTOR 1.5mm pitch/Crimp style Wire-to-wire connectors Matable with ZH and ZR receptacles Specifications ZM connector Current rating: 0.7A AC, DC max. (AWG 28) Voltage rating: 50V AC, DC max. (See Note below.) Crimp style Temperature range: -25C to +85C ZH connector (including temperature rise in applying electrical current) Contact resistance: Initial value/ 20m max. After environmental testing/ 30m max. Insulation resistance: 500M min. Withstanding voltage: 500V AC/minute Applicable wire: AWG 30 to 28 Note: Contacts are exposed at the housing lances. Care should be taken so that these parts do not touch the Insulation displacement ZR connector metal section of the chasis. 1.5mm pitch connectors allow higher * Compliant with RoHS. densities. * Refer toGeneral Instruction and Notice when using Terminals and Connector at the end of this catalog. Compact design * Contact JST for details. Housing-to-terminal locks Both crimp style and insulation Standards displacement receptacles can be used 0 Recognized E60389 Fully shrouded header resistsrockin during mating Certified LR20812 1 ZM/ZH connector ZM/ZR connector 9.2 Plug / ZM connector 3.6 B Contact Housing 7 2.8 2.2 1 3 2 1 1.5 2.85 A 1.5 Applicable wire Dimensions (mm) Qty / Circuits Model No. Qty / Model No. Insulation O.D. bag AB 2 reel mm AWG (mm) 5.5 2 ZMR-02 1.5 2,000 0.05 0.08 30 28 0.7 0.9 16,000 SMM-003T-P0.5 7.0 3 ZMR-03 3.0 2,000 9 12.0 16.0 1,000 ZMR-09 Material and Finish 13 18.0 22.0 1,000 ZMR-13 Phosphor bronze, tin-plated (reflow treatment) Material RoHS compliance Glass-filled PA 66, UL94V-0 Applicator RoHS compliance Crimping Contact machine Crimp applicator Crimp applicator with dies Dies SMM-003T-P0.5 * Note: *Strip-crimp applicator 1 ST 0.5 1.05 3.6 3.6 4.1 0.3 8.1 JST JST 3 3 2 1ZM CONNECTOR Receptacle / ZH connector (Crimp style) B Contact Housing 1.5 A 3.4 1.5 4 2.2 0.5 1 1.4 1.1 Dimensions (mm) Dimensions (mm) Qty / Circuits Model No. Insulation Qty / bag Model No. AB 2 mm AWG (mm) reel 2 1.5 4.5 1,000 ZHR-2 SZH-003T-P0.5 0.032 0.08 32 28 0.5 0.9 16,000 3 3.0 6.0 1,000 ZHR-3 15.0 9 ZHR-9 12.0 1,000 Material and Finish 21.0 13 ZHR-13 18.0 1,000 Phosphor bronze, tin-plated (reflow treatment) Material RoHS compliance PA 66, UL94V-0 Applicator Crimping RoHS compliance Contact machine Crimp applicator Crimp applicator with dies Dies SZH-003T-P0.5 * Note: *Strip-crimp applicator Receptacle / ZR connector (IDC) Model No. Dimensions (mm) Qty / Receptacle Circuits bag AWG 30 AWG 28 AB A 1.5 2 02ZR-3H-P 02ZR-8M-P 1.5 4.5 2,000 1.5 4.4 3 3.0 6.0 2,000 03ZR-3H-P 03ZR-8M-P 9 12.0 15.0 2,000 09ZR-3H-P 09ZR-8M-P 13 13ZR-3H-P 13ZR-8M-P 18.0 21.0 2,000 Material JST Contact: Phosphor bronze, tin-plated (reflow treatment) B 4.1 Housing: Glass-filled PA 66, UL94V-0 RoHS compliance 2 3.1 0.3 1.5 2.7 0.3 4.2 0.3 3 2 1