HLR-02V JST

HL CONNECTOR 3.96mm pitch/Disconnectable Crimp style Wire-to-wire connectors Specifications Current rating: 7A AC, DC max. Voltage rating: 300V AC, DC max. - + Temperature range: 25C to 90C (including temperature rise in applying electrical current) Contact resistance: Initial value/7m max. After environmental testing/10m max. Insulation resistance: 1,000M min. Withstanding voltage: 1,500V AC/minute Applicable wire: AWG #22 to #18 2 0.3 to 0.75mm Applicable panel thickness: 0.7 to 2.0mm * Compliant with RoHS. * Refer toGeneral Instruction and Notice when using Terminals and Connector at the end of this catalog. Low insertion force contact * Contact JST for details. Housing lance Note: The current rating varies depending on the number of circuits and the Inner-housing lock wire size used in each connector. The table below lists the current rating as a function of the number of circuits and wire size. Secondary retainers Current unit: A Panel lock construction Wire size (AWG) Circuits #18 #20 #22 Standards Recognized E60389 0 Certified LR20812 1 R50171609 2 Panel layout and Assembly layout (2 and 3 circuits) (4, 8 and 12 circuits) (including retainer) (including retainer) 7.5 7.5 Shape I Shape II 3.0 A B A B Panel hole dimensions (mm) General tolerance Panel hole Applicable panel Circuits Receptacle housing shape thickness (mm) 0.13 0.13 0.1 0.13 0.1 A B C D E 2 HLR-02V 1 9.5 15.7 4.4 6.4 1.0 3 HLR-03V 1 13.5 19.7 4.4 6.4 1.0 4 HLR-04V 2 9.5 15.7 5.6 12.0 3.2 8 HLR-08V 2 17.4 23.6 5.6 12.0 3.2 12 HLR-12V 2 25.3 31.6 5.6 12.0 3.2 Note: 1. Punch holes in the panel according to the figures and table shown above. Burrs must be removed. 2. The strength of the panel must be considered when punching two or more holes. 3. The connector must be inserted from the same side as the hole is punched. 1 E C 0.7 D 9.8 E C D 14.7 4 circuits : 15.0 8 to 12 circuits : 15.1 (including retainer) HL CONNECTOR Contact Model No. Applicable wire Insulation O.D. Qty / Pin contact 2 (mm) reel mm AWG # Pin contact Socket contact 0.3 0.75 22 18 1.5 2.2 6,000 SSM-21T-P1.4 SSF-21T-P1.4 Material and Finish Phosphor bronze, tin-plated (reflow treatment) RoHS compliance Note: Contact JST for special products. Applicator Crimping Contact machine Crimp applicator Dies Crimp applicator with dies Socket contact SSM-21T-P1.4 SSF-21T-P1.4 Contact position location numbers Contact position numbers are stamped Retainer Retainer Receptacle housing Plug housing Receptacle housing Plug housing 2