Emboss Tape LEB CONNECTOR 4.0mm pitch/For LED Lamp/Board-to-board, Disconnectable Crimp style connectors Absorption misalignment mechanism (only connector pitch direction) The PCB layout is in common with plug and receptacle connectors. Mechanism for preventing wrong insertion Crimp type socket that is mated with receptacle connector is available. Specifications <For board-to-board> Current rating: 3A AC, DC Voltage rating: 300V AC, DC Temperature range: -55C to +105C (including temperature rise in applying electrical current) Contact resistance: Initial value/ 20m max. After environmental testing/ 40m max. Insulation resistance: 1,000M min. Withstanding voltage: 1,700V AC/minute <For disconnectable crimp style> Current rating: 3A AC, DC (AWG 22) Voltage rating: 300V AC, DC Temperature range: -55C to +105C (including temperature rise in applying electrical current) Contact resistance: Initial value/ 20m max. Considering about luminescence property After environmental testing/ 40m max. of LED device, this LEB connector is Insulation resistance: 1,000M min. designed as low profile type connector Withstanding voltage: 1,700V AC/minute (height: 2.7mm) for LED lighting, and achieves Applicable wire: Conductor size/ AWG 26 to 22 the space saving. The horizontal connection Insulation O.D./ 0.95 to 1.3mm between PCBs enables and the mechanism * Compliant with RoHS. of absorbing the PCB misalignment has * Refer toGeneral Instruction and Notice when using been installed considering the parallel use Terminals and Connector at the end of this catalog. for the connector. Fork type contact that has * Contact JST for details. a high contact pressure (receptacle side) Standards and enough mating stroke provide the stable contact performance even if the PCB 0 Recognized E60389 expands and contracts due to heat. Certified LR20812 1 Receptacle Plug 8.3 8.3 4 4 0.8 1 0.8 1 (11) Note: 1. The above figure is the figure viewed from the connector mounting side. Note: 2. Tolerances are non-cumulative: 0.05mm for all centers. The dimensions above should serve as a guideline. Contact JST for details. 1 0.2 1.2 (0.05) 3.05 1.5 4.05 0.2 1.2 (0.05) 3.05 1.5 4.05LEB CONNECTOR Plug <Single circuit> <2 circuits> 5.4 5.4 4.8 4 9 8.8 9 Circuits Model No. Q ty / reel 01P-LEBSS-TF 02P-LEBSS-TF Material and Finish Contact: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Housing: PA 9T, UL94V-0, white Solder tab: Copper alloy, tin-plated (reflow treatment) RoHS compliance This product displays (LF)(SN) on a label. Note: The products listed above are supplied on embossed-tape. Receptacle <Single circuit> <2 circuits> 8.8 4.8 5.4 4 5.4 Circuits Model No. Q ty / reel 01R-LEBSS-TB 02R-LEBSS-TB Material and Finish Contact: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Housing: PA 9T, UL94V-0, white Solder tab: Copper alloy, tin-plated (reflow treatment) RoHS compliance This product displays (LF)(SN) on a label. Note: The products listed above are supplied on embossed-tape. 2 2.7 2.7 2.7 2.7