Emboss Tape Crimp ZH CONNECTOR Disconnectable Crimp style connectors 1.5mm (.059 ) pitch Features Compact, low profile design The ZH connector requires only about 45% of the installation space required by the standard JST 2.0mm (.079 ) pitch connector. Housing lances The contact retention lances on the resilient housing allow visual confirmation of contact lock-in for easy and secure insertion. Reliable contact construction The dimple at the center of the contact ensures positive contact and low contact resistance at all times, even when the connector is subjected to vibration or distortion. Therefore this connector is ideal for use under low current, low voltage conditions. Distortion resistant construction The ZH connector is very small with a The header is fully shrouded and thus protects the receptacle mounting height of 5.6mm (.220 ) and a from damage that could be caused by mating the connectors thickness of only 3.5mm (.138 ). Contact at an angle or by otherwise mismating the connectors. retention lances on the housing make insertion easier, while the dimple at the Compatible with the ZR insulation displacement connectors center of the contact ensures reliable The same shrouded header can be used for either the ZR IDC- contact with the post. style connector or the ZH crimp style connector. This allows both types of connector to be used interchangeably without replacing the header. Specifications Current rating: 1.0A AC, DC (AWG 26) Voltage rating: 50V AC, DC Temperature range: -25C to +85C (including temperature rise in applying electrical current) Contact resistance: Initial value/20m max. After environmental testing/30m max. Insulation resistance: 500M min. Withstanding voltage: 500V AC/minute Applicable wire: AWG 32 to 26 Applicable PC board thickness: 0.6 to 1.2mm(.024 to .047 ), 1.6mm(.063 ) * Contact JST if Lead-Free product is required. * Refer toGeneral Instruction and Notice when using Terminals and Connector at the end of this catalog. * Contact JST for details. Standards Recognized E60389 0 Certified LR20812 1 R9351092 2 30ZH CONNECTOR Contact Applicable wire Q ty / Model No. reel 2 mm AWG Insulation O.D. mm(in.) SZH-002T-P0.5 0.08 to 0.13 28 to 26 0.8 to 1.1(.031 to .043) 13,000 SZH-003T-P0.5 0.032 to 0.08 0.5 to 0.9(.020 to .035) 16,000 32 to 28 4.0(.157) Material and Finish 2.2(.087) 0.5(.020) 1.4(.055) 1.0 1.1(.043) Phosphor bronze, tin-plated (.039) Housing Dimensions mm(in.) Q ty / Circuits Model No. bag A B 2 ZHR- 2 1.5(.059) 4.5(.177) 1,000 3 ZHR- 3 3.0(.118) 6.0(.236) 1,000 4 ZHR- 4 4.5(.177) 7.5(.295) 1,000 B 5 ZHR- 5 6.0(.236) 9.0(.354) 1,000 1.5(.059) A 3.4(.134) 6 ZHR- 6 7.5(.295) 10.5(.413) 1,000 1.5(.059) 6 ZHR- 6(3.0) 15.0(.591) 18.0(.709) 1,000 7 ZHR- 7 9.0(.354) 12.0(.472) 1,000 8 ZHR- 8 10.5(.413) 13.5(.531) 1,000 9 ZHR- 9 12.0(.472) 15.0(.591) 1,000 10 ZHR-10 13.5(.531) 16.5(.650) 1,000 11 ZHR-11 15.0(.591) 18.0(.709) 1,000 12 ZHR-12 16.5(.650) 19.5(.768) 1,000 13 ZHR-13 18.0(.709) 21.0(.827) 1,000 Material Nylon 66, UL94V-0, natural (white) Note: 1. ZHR-6(3.0) is 6 circuits 3.0mm (.118 ) pitch plugged up. As for this housing, only circuit No.1 is marked. 2. ZHR-6 (3.0) is not UL/CSA approved. <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. ZHR-2-oo- (blank)natural (white) Kblack Rred Eblue Mgreen 31 0.3 1.5 (.012) (.059) 0.3(.012) 4.2(.165) 0.3(.012) 6 5 3 2 1