Non-coated Single and double sided copper clad epoxy glass FR4 Suitable for direct transfer of artwork Note the board may need cleaning prior to use with eraser/cleaner (141-330) Exposed copper cladding is removed using ferric chloride solution (Order Code 141-311 or 149-080) Manufactured in accordance with BS4584 Part 3 Board thickness 1.6mm Copper content 305 g/m sq (1oz/ft2) Copper thickness (0.0014 )305 g/m sq PCB61 149-054 160 x 100 149-055 220 x 100 149-056 233.4 x 160 149-057 457 x 305 Double sided 149-058 160 x 100 149-059 220 x 100 149-060 233.4 x 160 149-061 457 x 305 The Laminat used on this product is 1.6mm FR4 1oz/1oz Either Kingboard 6160 FR4 or Nan-ya SN-L4 FR4 (whichever is available at the time) is used They are both the same type of laminate but the NAN-YA has a higher CTI and a slightly Higher TG X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for kelan manufacturer: Other Similar products are found below : 14339 5004 149056 141303 149061 149057 451060 149054 149059 451058 147899