Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Temperature 150C, Ultra-Stable X8R Dielectric, 10 100 VDC (Commercial & Automotive Grade) Overview KEMETs Ultra-Stable X8R dielectric features a 150C In addition to commercial grade, automotive grade devices maximum operating temperature, offering the latest in are available and meet the demanding Automotive high temperature dielectric technology and reliability for Electronics Councils AECQ200 qualification requirements. extreme temperature applications. It offers the same temperature capability as conventional X8R, but without the capacitance loss due to applied DC voltage. Ultra-Stable X8R exhibits no change in capacitance with respect to voltage and boasts a minimal change in capacitance with reference to ambient temperature. It is a suitable replacement for higher capacitance and larger footprint devices that fail to offer capacitance stability. Capacitance change with respect to temperature is limited to 15% from 55C to +150C. Driven by the demand for a more robust and reliable component, Ultra-Stable X8R dielectric capacitors were developed for critical applications where reliability and capacitance stability at higher operating temperatures are a concern.These capacitors are widely used in automotive circuits as well as general high temperature applications. Ordering Information C 1210 C 184 K 3 H A C AUTO Rated Packaging/ Case Size Specification/ Capacitance Capacitance Failure 2 Ceramic Voltage Dielectric Termination Finish Grade 1 ( x ) Series Code (pF) Tolerance Rate/Design (VDC) (C-Spec) 0402 C = Standard Two B = 0.10 pF 8 = 10 H = Ultra A = N/A C = 100% Matte Sn See 0603 significant C = 0.25 pF 4 = 16 Stable X8R L = SnPb (5% Pb minimum) Packaging 0805 digits and D = 0.5 pF 3 = 25 C-Spec 1206 number of F = 1% 5 = 50 Ordering 1210 zeros G = 2% 1 = 100 Options 1812 J = 5% Table K = 10% M = 20% 1 Flexible termination option is available. Please see FT-CAP product bulletin C1013 X8R FT-CAP SMD. 2 Additional termination finish options may be available. Contact KEMET for details. 2 SnPb termination finish option is not available on automotive grade product. Built Into Tomorrow KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 864-963-6300 www.kemet.com C1007 X8R ULTRA 150C SMD 10/28/2020 1Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Temperature 150C Ultra-Stable X8R Dielectric, 10 100 VDC (Commercial & Automotive Grade) Packaging C-Spec Ordering Options Table Packaging/Grade Packaging Type Ordering Code (C-Spec) 1 Commercial Grade Bulk Bag Not Required (Blank) 7 Reel/Unmarked TU 7411 (EIA 0603 and smaller case sizes) 13 Reel/Unmarked 7210 (EIA 0805 and larger case sizes) 2 7 Reel/Unmarked/2 mm pitch 7081 2 13 Reel/Unmarked/2 mm pitch 7082 3 Automotive Grade 7 Reel AUTO AUTO7411 (EIA 0603 and smaller case sizes) 13 Reel/Unmarked AUTO7210 (EIA 0805 and larger case sizes) 2 7 Reel/Unmarked/2 mm pitch 3190 2 13 Reel/Unmarked/2 mm pitch 3191 1 Default packaging is Bulk Bag. An ordering code C-Spec is not required for Bulk Bag packaging. 1 The terms Marked and Unmarked pertain to laser marking option of capacitors. All packaging options labeled as Unmarked will contain capacitors that have not been laser marked. 2 The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case size devices. For more information regarding 2 mm pitch option see Tape & Reel Packaging Information. 3 Reeling tape options (Paper or Plastic) are dependent on capacitor case size (L x W) and thickness dimension. See Chip Thickness/Tape & Reel Packaging Quantities and Tape & Reel Packaging Information. 3 For additional Information regarding AUTO C-Spec options, see Automotive C-Spec Information. 3 All Automotive packaging C-Specs listed exclude the option to laser mark components. Please contact KEMET if you require a laser marked option. For more information see Capacitor Marking. Benefits 55C to +150C operating temperature range No capacitance change with respect to applied rated DC Lead (Pb)-Free, RoHS and REACH compliant voltage EIA 0402, 0603, 0805, 1206, 1210, and 1812 case sizes Non-polar device, minimizing installation concerns DC voltage ratings of 10 V, 16 V, 25 V, 50 V and 100 V Offered in both commercial and automotive grades Capacitance offerings ranging from 0.5 pF to 0.22 F 100% pure matte tin-plated termination finish that allowing Available capacitance tolerances of 0.10 pF, 0.25 pF, for excellent solderability. 0.5 pF, 1%, 2%, 5%, 10%, and 20% SnPb plated termination finish option available upon Extremely low ESR and ESL request High thermal stability (5% Pb minimum) High ripple current capability Applications Typical applications include decoupling, bypass and filtering in extreme environments such as down-hole oil exploration, under-hood automotive, military and aerospace. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 864-963-6300 www.kemet.com C1007 X8R ULTRA 150C SMD 10/28/2020 2