Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R with KONNEKT Technology, 25 3,000 VDC (Commercial & Automotive Grade) Lead-free Overview Capacitance change is limited to 15% from 55C to KEMET s X7R with KONNEKT technology surface mount +125C. capacitors are designed for applications where higher capacitance and voltage are needed without requiring In addition to their use in power supplies, these capacitors additional board space. KONNEKT high density packaging can be used in industries related to automotive (hybrid), technology uses an innovative Transient Liquid Phase telecommunications, medical, military, aerospace, Sintering (TLPS) material to create a surface mount multi- semiconductors and test/diagnostic equipment. chip solution for high density packaging. Automotive Grade devices are also available which meet the demanding Automotive Electronics Council s AEC-Q200 KEMETs X7R dielectric features a 125C maximum qualification requirements operating temperature and is considered temperature stable. The Electronics Components, Assemblies For added reliability, KEMET s flexible termination and Materials Association (EIA) characterizes X7R technology is an available option that provides superior dielectric as a Class II material. Components of this flex performance over standard termination systems. This classification are fixed, ceramic dielectric capacitors technology was developed to address flex cracks, which are suited for bypass and decoupling applications or for the primary failure mode of MLCCs and typically the result frequencydiscriminating circuits where Q and stability of of excessive tensile and shear stresses produced during capacitance characteristics are not critical. X7R exhibits board flexure and thermal cycling. Flexible termination a predictable change in capacitance with respect to time technology inhibits the transfer of board stress to the rigid and voltage, boasting a minimal change in capacitance body of the MLCC, therefore mitigating flex cracks which with reference to ambient temperature. can result in low IR or short circuit failures. Benefits Applications Commercial and Automotive Grade (AEC-Q200) SMPS (Switch Mode Power Supplies) Industry-leading CV values Lighting ballasts, HID lighting Capacitance offerings ranging from 2.4 nF 20 F DC/DC Converters DC voltage ratings from 25 3,000 V Telecom equipment EIA 1812 and 2220 case sizes Industrial and medical equipment Operating temperature range of 55C to +125C Filters Low ESR and ESL Snubbers Non-polar device, minimizing installation concerns DC Blocking Lead (Pb)-free, RoHS, and REACH compliant Bypass Surface mountable using standard MLCC reflow profiles Flexible termination option available. Built Into Tomorrow KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1108 KONNEKT X7R 8/25/2021 1 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.comSurface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) X7R with KONNEKT Technology, 25 3,000 VDC (Commercial & Automotive Grade) Ordering Information C 1812 C 944 K C R L C XXXX Orientation and Case Size Specification/ Capacitance Capacitance Rated Subclass Termination Ceramic Dielectric Packaging (x ) Series Code (pF) Tolerance Voltage (V) Designation Finish (Suffix/C-Spec) C 1812 C = Standard Two single K = 10% 3 = 25 V R = L = C = See 2220 X = Flexible digits + M = 20% 5 = 50 V X7R KONNEKT 100% matte SnPackaging and Termination number of 1 = 100 V Orientation zeros. 2 = 200 V C-Spec A = 250 V Ordering C = 500 V Options Tabl B = 630 V D = 1,000 V F = 1,500 V G = 2,000 V Z = 2,500 V H = 3,000 V Additional termination finish options may be available. Contact KEMET for details. Packaging C-Spec Ordering Options Table Packaging/Grade 1 Packaging Type Mounting Orientation Ordering Code (C-Spec) Commercial Grade 7 Reel/Unmarked TU 13 Reel/Unmarked 7210 Automotive Grade 7 Reel/Unmarked AUTO 13 Reel/Unmarked AUTO7210 1 All parts are shipped in standard orientation which refers to the positioning of the KONNEKT capacitors in the Tape and Reel pockets. KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1108 KONNEKT X7R 8/25/2021 2 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com