Snap-In Aluminum Electrolytic Capacitors PEH532 Series, +105C Overview Applications KEMET s PEH532 is a long-life electrolytic capacitor designed Typical applications for KEMET s PEH532 capacitor include to offer high ripple current capability and low mounting cost. Low switch mode power supplies (SMPS), drives, welding equipment, ESR is the result of a very low resistive paper/electrolyte system. uninterruptible power supplies (UPS), and other power electronic Low ESR, together with the TDC thermal concept, gives the applications where high current ratings and compact size are PEH532 a high ripple current capability. important. Benefits Snap-In 1,500 hours at +105C (V , I applied) R R PCB mounting Low ESR and ESL High ripple current Part Number System PEH532 J AC 433 0 M 2 Series Voltage (VDC) Size Code Capacitance Code (F) Version Capacitance Tolerance Termination Snap-In type J = 35 See Dimension The second two digits 0 = Standard M = 20% See Termination Aluminum M = 63 Table indicate the two most Table Electrolytic P = 100 significant digits of the R = 200 capacitance value. The S = 250 first digit indicates the U = 350 total number digits. V = 400 Y = 450 One world. One KEMET KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com A4023 PEH532 8/5/2014 1Snap-In Aluminum Electrolytic Capacitors PEH532, +105C Performance Characteristics Item Performance Characteristics Capacitance Range 68 27,000 F Rated Voltage 35 450 VDC Operating Temperature -40 to +105C Capacitance Tolerance 20% at 100 Hz / +20C Rated Voltage and Ripple Current at D (mm) Rated Voltage at +105C (hours) +105C (hours) Operational Lifetime 22 35 1,500 2,000 Shelf Life 4 years at +40C 0 VDC I = 0.003 CV (A) Leakage Current C = rated capacitance (F), V = rated voltage (VDC). Voltage applied for 5 minutes at +20C. Procedure Requirements 0.75 mm displacement amplitude or 10 g maximum acceleration. Vibration Vibration Test Specifications No leakage of electrolyte or other visible damage. Deviations in capacitance applied for three 2-hour sessions at and tan from initial measurements must not exceed: C/C < 5% 10 500 Hz (Capacitor clamped by body). Standards IEC 60384-4 long life grade 40/85/56, in accordance with CECC 30 301809 Test Method & Performance Endurance Life Test Conditions Performance Temperature +105C Test Duration 2,000 hours Ripple Current Maximum ripple current specified in table Voltage The sum of DC voltage and the peak AC voltage must not exceed the rated voltage of the capacitor Performance The following specifications will be satisfied when the capacitor is tested at +20C: 160 V Within 15% of the initial value Capacitance Change > 160 V Within 10% of the initial value Equivalent Series Resistance Does not exceed 200% of the initial value Leakage Current Does not exceed leakage current limit KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com A4023 PEH532 8/5/2014 2