TANTALUM DIPPED / RADIAL POLAR
PERFORMANCE CHARACTERISTICS
CAPACITANCE/VOLTAGE RANGE: AC RIPPLE VOLTAGE: Permissible AC ripple volt-
T35X/T39X: 0.1-680F, 3-50 Volts. age is related to equivalent series resistance
T36X: 0.1-330F, 6-50 Volts. (ESR) and power dissipation capability. Maximum
power dissipation for each case size is listed in
CAPACITANCE TOLERANCE: Available in stan- Table below. For additional description see page
dard EIA nominal values with 20% and 10% 78.
standard.
Case Power Dissipation
Size (max.) @ 25C (watts)
DISSIPATION FACTOR: Maximum DF limits are
shown in corresponding series part number list-
T35X, A .040
T39X B .050
ings. See Application Notes Section, page 76 for
C .060
additional information.
D .065
E .070
DC LEAKAGE CURRENT: Maximum leakage val-
F .080
G .090
ues at 25 are shown in part number listings,
H .100
pages 63-65, 67, 68 and 70. See Application
J.110
Notes Section, pages 76 & 77 for additional infor-
K .120
mation.
L .130
M .140
RATED VOLTAGE; WORKING VOLTAGE; SURGE
T36X A .050
VOLTAGE; REVERSE VOLTAGE: See Application B .075
C .090
Notes Section, pages 76 & 77 for description.
D .135
Maximum Power Dissipation Capability @ 25C
IMPEDANCE and ESR: See Application Notes
Section, page 77 & 78 for description. Reference
ESR values are shown in table below. ENVIRONMENTAL CONSIDERATIONS:
A. Shock Test: MIL-STD-202, Method 213.
B. Thermal Shock, MIL-STD-202, Method 107,
Commercial T35X/T36X/T39X ESR (OHMS) at 100 kHz @ +25C Condition A.
(The ESR values provided below are for reference only. No warranty, as
stated on page 3 and reincorporated here, is made as to the accuracy C. Moisture Resistance: MIL-STD-202,
of these values for any particular T35X, T36X, T39X Series product.)
Method 106.
Cap. 6 10 16 20 25 35 50
D. Solderability: MIL-STD-202, Method 208.
F Volt Volt Volt Volt Volt Volt Volt
For additional Environmental Test Information
0.10 26.0 26.0
0.15 21.0 21.0
see pages 80, 81 and 82.
0.22 17.0 17.0
0.33 15.0 15.0
0.47 13.0 13.0
LEAD MATERIAL: Effective June 30, 2005 the
0.68 10.0 10.0
T35x, T368 and T39x Series will be available, as an
1.00 10.0 10.0 8.0 8.0
1.50 10.0 9.0 8.0 6.0 5.0
option, with 100% Matte Tin (RoHS compliant) lead wire
2.20 13.0 8.0 7.0 6.0 5.0 3.5
or Sn/Pb lead wire. Please see page 63 for part number
3.30 13.0 10.0 6.0 5.5 5.0 4.0 3.0
4.70 10.0 8.0 5.0 4.5 4.0 3.0 2.5
ordering information. The T363 and T369 lead mater-
6.80 8.0 6.0 4.0 3.6 3.1 2.5 2.0
ial will remain Sn/Pb solder coated steel core with a
10.0 6.0 5.0 3.2 2.9 2.5 2.0 1.6
15.0 5.0 3.7 2.5 2.3 2.0 1.6 1.2
copper ply per MIL-STD-127 and at this time will not
22.0 3.7 2.7 2.0 1.8 1.5 1.3 1.0
be available with a 100% Sn option.
33.0 3.0 2.1 1.6 1.4 1.2 1.0
47.0 2.0 1.7 1.3 1.2 1.0 0.8
68.0 1.8 1.3 1.0 0.9 0.8
100.0 1.6 1.0 0.8 0.6
LEAD TAPE AND REEL: Reeling per specification
150.0 0.9 0.8 0.6
RS-468. See pages 72 - 74 for additional information.
220.0 0.9 0.6
330.0 0.7
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 61
Tantalum Dipped /
Radial PolarTANTALUM DIPPED / RADIAL - POLAR
T350, T351, T352, T353, T354, T355 & T356 SERIES ULTRADIP II
The KEMET UltraDip II Capacitors offer the designer of quality The plastic case provides a tough barrier coating and maintains pre-
instruments and entertainment systems the widely recognized cision of lead wire spacing within 0.015 inch. The gold color epoxy
advantages inherent in solid tantalum capacitors at competitive utilized permits Laser marking with outstanding permanency and
prices. legibility. All case sizes are printed with capacitance, voltage, polar-
ity and vendor identification.
The UltraDip II Series, miniature dipped solid tantalum capacitors,
provide the designer with the advantage of compactness plus low Solid tantalum devices exhibit no degradation failure mode during
leakage and low DF performance characteristics for filtering, shelf storage and show a constantly decreasing failure rate (i.e.,
bypassing, coupling, blocking and RC timing circuits. This series fea- absence of wearout mechanism) during life tests.
tures a capacitance range from 0.1 to 680 microfarads at voltages
The UltraDip II Series provides self-insulating cases which are
from 3 to 50 VDC. UltraDip II capacitors utilize the same sophisti-
resistant to shock and vibration. These capacitors exhibit low DCL,
cated materials and processes which have advanced KEMET
ESR and Impedance and have excellent temperature stability.
Electronics Corporation to the leadership position in solid tantalum
Effective June 30, 2005 the T35x Series is RoHS compliant.
capacitors.
CAPACITOR OUTLINE DRAWINGS
T350 T351 T352 T353 T354 T355 T356
.250.025
(6.35.64)
D D D D D D
D
Max. Max. Max. Max. Max. Max. Max.
H
HH H H HH H H
Max.
Max. Max. Max. Max.Max. Max. Max.
.187.032 .187.032 .187.032 .187.032 .187.032 .187.032
.50.05 .02
.02.02
**.02 (4.75.81) (0.5) (4.75.81) (4.75.81) (4.75.81) (4.75.81) (4.75.81)
(0.5)(0.5)
(0.5)
.20 .20 .250
.10
(5.08) (5.08) (6.35) .125 .20
Lead Spacing
(2.54)
(3.18) (5.08)
See Note 2
*Lead Tolerance = .015 ( .38 mm) ** All Lead Diameters = .02 .002 (0.5 .05 mm)
DIMENSIONS INCHES (MILLIMETERS)
All T350 T351 T352 T353 T354 T355 T356
(1) (1) (1) (1) (1) (1)
Case D H H H H H H(1) H
Size Max Diameter Max Height Max Height Max Height Max Height Max Height Max Height Max Height
A .175 (4.5) .280 (7.1) .380 (9.6) .400 (10.2) .400 (10.2) .340 (8.6) .340 (8.6) .340 (8.6)
B .175 (4.5) .300 (7.6) .390 (9.9) .410 (10.4) .410 (10.4) .350 (8.9) .350 (8.9) .350 (8.9)
C .196 (5.0) .330 (8.4) .420 (10.7) .440 (11.2) .440 (11.2) .380 (9.6) .380 (9.6) .380 (9.6)
D .196 (5.0) .340 (8.6) .430 (10.9) .450 (11.4) .450 (11.4) .390 (9.9) .390 (9.9) .390 (9.9)
E .216 (5.5) .350 (8.9) .440 (11.2) .460 (11.7) .460 (11.7) .400 (10.2) .400 (10.2) .400 (10.2)
F .236 (6.0) .390 (9.9) .480 (12.2) .500 (12.7) .500 (12.7) .440 (11.2) .440 (11.2) .440 (11.2)
G .250 (6.3) .400 (10.2) .490 (12.4) .510 (13.0) .510 (13.0) .450 (11.4) .450 (11.4) .450 (11.4)
H .300 (7.6) .400 (10.2) .500 (12.7) .520 (13.2) .520 (13.2) .470 (11.9) .470 (11.9) .470 (11.9)
(2)
J .330 (8.4) .500 (12.7) .580 (14.7) .550 (14.0) .550 (14.0)
(2)
K .350 (8.9) .530 (13.5) .630 (16.0) .610 (15.5) .610 (15.5)
Note 3 Note 3 Note 3
(2)
L .350 (8.9) .630 (16.0) .730 (18.5) .710 (18.1) .710 (18.1)
(2)
M .400 (10.2) .670 (17.0) .760 (19.3) .740 (18.8) .740 (18.8)
NOTES: (1) All H Dimensions are from Capacitor seating plane to top of Capacitor.
(2) On T350 Series, case sizes A-H are supplied with .100(2.54) lead spacingcase sizes J-M are supplied with .200(5.08) lead spacing.
(3) These case sizes are not available for T351, T352 & T355 capacitors.
LEAD CONFIGURATION & SPACING CHART
LEAD SERIES
CASE CONFIGURATION T350 T351 T352 T353 T354 T355 T356
.100 X X
.125 X
.200 X X X
.250 X
A-H STRAIGHT LEAD X
STAND OFF X X X X X
SNAP-IN X
.100
.125
.200 X X X
.250 X
J-M STRAIGHT LEAD X
T350 T351 T352 T353 T354 T355 T356
STAND OFF X X
SNAP-IN X
62 KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300
NOT AVAILABLE
NOT AVAILABLE
NOT AVAILABLE