Datasheet Brief KTS1697A For full datasheet, click HERE. 7A VBUS Current-Sink Protection Load Switch RMS Features Brief Description 3V to 23V Operating Voltage Range The KTS1697A is a low-resistance, high-current load 29V Abs. Max. Rating at IN and OUT switch with soft-start, over-voltage protection, ideal 7A Continuous Current Rating diode reverse-current protection with fast recovery, 15A Pulse Current Rating (duration Pd limited) short-circuit protection, over-current protection, over- 11m typ. On-Resistance from IN to OUT temperature protection, and integrated TVS. It is Soft-Start (SS) Limits Inrush Current optimized to protect systems with USB Type-C PD ports Over-Voltage Protection (OVP) at IN and barrel connectors that sink up to 140W at 20V and 23V Internally Fixed must withstand up to 29V on VBUS. 4V to 23V External Resistor Programmable Automatic reverse-current protection acts as an ideal Ideal Diode Reverse-Current Protection (RCP) diode with fast recovery and isolates VBUS when RCP Fast Recovery without Fault Indication charging or powering the system via another port, Short-Circuit Protection (SCP) at OUT regardless of the enable status. Soft-start limits inrush Over-Current Protection (OCP) current when turning on with large capacitors at the Over-Temperature Protection (OTP) output. The integrated TVS provides IEC industry Transient Voltage Suppression (TVS) at IN standard ESD and 90V surge ratings. 90V Surge Protection (IEC61000-4-5) 8kV ESD Contact Discharge (IEC61000-4-2) The KTS1697A is packaged in advanced, fully green 15kV ESD Air Gap Discharge (IEC61000-4-2) compliant, 2.70 x 2.70mm, 25-bump Wafer-Level Chip- EN Active-Low Enable Logic Input Scale Package (WLCSP). Auto-Retry after All Faults ACOK Open-Drain Output Flag Applications -40C to 85C Operating Temperature Range Notebooks, Netbooks, Ultra-Books, Tablets 25-bump WLCSP 2.70 x 2.70mm (0.5mm pitch) Mini Desktop PCs, Docking Stations, Monitors Typical Application January 2022 Revision 04a Page 1 of 2 Kinetic Technologies Confidential Datasheet Brief KTS1697A Ordering Information Operating 1 Part Number Marking Package Temperature KTS1697AEOAB-TR QYXXYYZZZZ -40C to +85C WLCSP-25 1. QY = Device ID, XX = Date Code, YY = Assembly Code, ZZZZ = Serial Number. Kinetic Technologies cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Kinetic Technologies product. No intellectual property or circuit patent licenses are implied. Kinetic Technologies reserves the right to change the circuitry and specifications without notice at any time. January 2022 Revision 04a Page 2 of 2 Kinetic Technologies Confidential