AP2012EC Kingbright

AP2012EC 2.0 x 1.25 mm SMD Chip LED Lamp DESCRIPTION PACKAGE DIMENSIONS The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode FEATURES 2.0 mm x 1.25 mm SMD LED, 1.1 mm thickness Low power consumption Wide viewing angle Ideal for backlight and indicator Package: 2000 pcs / reel Moisture sensitivity level: 3 Halogen-free RoHS compliant APPLICATIONS Backlight Status indicator Home and smart appliances Wearable and portable devices Healthcare applications RECOMMENDED SOLDERING PATTERN (units : mm tolerance : 0.1) Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE 2 1 Iv (mcd) 20mA Viewing Angle Emitting Color Part Number Lens Type (Material) Min. Typ. 21/2 8 15 High Efficiency Red AP2012EC Water Clear 160 (GaAsP/GaP) *3 *8 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 4 2021 Kingbright. All Rights Reserved. Spec No: DSAA4049 / 1203000098 Rev No: V.11A Date: 09/08/2021 AP2012EC ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Typ. Max. Wavelength at Peak Emission I = 20mA High Efficiency Red 627 - nm F peak 1 Dominant Wavelength I = 20mA High Efficiency Red 617 - nm F dom Spectral Bandwidth at 50% REL MAX High Efficiency Red 45 - nm I = 20mA F Capacitance C High Efficiency Red 15 - pF 2 Forward Voltage I = 20mA V High Efficiency Red 2 2.5 V F F Reverse Current (V = 5V) I High Efficiency Red - 10 A R R Temperature Coefficient of peak TC High Efficiency Red 0.13 - nm/C peak I = 20mA, -10C T 85C F Temperature Coefficient of dom TC High Efficiency Red 0.06 - nm/C dom I = 20mA, -10C T 85C F Temperature Coefficient of V F TC High Efficiency Red -1.9 - mV/C V I = 20mA, -10C T 85C F Notes: 1. The dominant wavelength (d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Parameter Symbol Value Unit Power Dissipation P 75 mW D Reverse Voltage V 5 V R Junction Temperature T 125 C j Operating Temperature T -40 to +85 C op Storage Temperature T -40 to +85 C stg DC Forward Current I 30 mA F 1 Peak Forward Current I 160 mA FM Electrostatic Discharge Threshold (HBM) 8000 V - 2 Thermal Resistance (Junction / Ambient) R 570 C/W th JA 2 Thermal Resistance (Junction / Solder point) R 430 C/W th JS Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2 2. R ,R Results from mounting on PC board FR4 (pad size 16 mm per pad). th JA th JS 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 4 2021 Kingbright. All Rights Reserved. Spec No: DSAA4049 / 1203000098 Rev No: V.11A Date: 09/08/2021