APHBM2012SURKCGKC

APHBM2012SURKCGKC 2.0 x 1.25 mm SMD Chip LED Lamp DESCRIPTIONS PACKAGE DIMENSIONS The Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode The Green source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES 2.0 mm x 1.25 mm SMD LED, 0.45 mm max. thickness Low power consumption Wide viewing angle Ideal for backlight and indicator Package: 2000 pcs / reel Moisture sensitivity level: 3 Halogen-free RoHS compliant RECOMMENDED SOLDERING PATTERN APPLICATIONS (units : mm tolerance : 0.1) Backlight Status indicator Home and smart appliances Wearable and portable devices Healthcare applications ATTENTION Observe precautions for handling Notes: 1. All dimensions are in millimeters (inches). electrostatic discharge sensitive devices 2. Tolerance is 0.1(0.004 ) unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE 2 1 Iv (mcd) 20mA Viewing A ngle Emitting Color Part Number Lens Type (Material) Min. Typ. 21/2 120 250 Hyper Red (AlGaInP) *40 *80 APHBM2012SURKCGKC Water Clear 120 20 50 Green (AlGaInP) *20 *50 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 4 2020 Kingbright. All Rights Reserved. Spec No: DSAG7623 / 1203005979 Rev No: V.16A Date: 05/04/2020 APHBM2012SURKCGKC ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Typ. Max. Hyper Red 645 Wavelength at Peak Emission I = 20mA - nm F peak Green 574 Hyper Red 630 1 Dominant Wavelength I = 20mA - nm F dom Green 570 Spectral Bandwidth at 50% REL MAX Hyper Red 28 - nm I = 20mA Green 20 F Hyper Red 35 Capacitance C - pF Green 15 Hyper Red 1.95 2.5 2 Forward Voltage I = 20mA V V F F Green 2.1 2.5 Hyper Red 10 Reverse Current (V = 5V) I - A R R Green 10 Temperature Coefficient of Hyper Red 0.14 peak TC - nm/C peak I = 20mA, -10C T 85C Green 0.12 F Temperature Coefficient of Hyper Red 0.05 dom TC - nm/C dom I = 20mA, -10C T 85C Green 0.08 F Temperature Coefficient of V Hyper Red -1.9 F TC - mV/C V I = 20mA, -10C T 85C Green -1.9 F Notes: 1. The dominant wavelength (d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Value Parameter Symbol Unit Hyper Red Green Power Dissipation P 75 75 mW D Reverse Voltage V 5 5 V R Junction Temperature T 115 115 C J Operating Temperature T -40 To +85 C op Storage Temperature T -40 To +85 C stg DC Forward Current I 30 30 mA F 1 Peak Forward Current I 185 150 mA FM Electrostatic Discharge Threshold (HBM) 3000 3000 V - 2 Thermal Resistance (Junction / Ambient) R 670 610 C/W th JA 2 Thermal Resistance (Junction / Solder point) R 550 490 C/W th JS Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2 2. R ,R Results from mounting on PC board FR4 (pad size 16 mm per pad). th JA th JS 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 4 2020 Kingbright. All Rights Reserved. Spec No: DSAG7623 / 1203005979 Rev No: V.16A Date: 05/04/2020