DE4SRD Kingbright

DE4SRD 15 mm x 15 mm Light Bar DESCRIPTIONS PACKAGE DIMENSIONS The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES Uniform light emitting area Easily mounted on P.C. boards or industry standard sockets Flush mountable Excellent on/off contrast Can be used with panels and legend mounts Mechanically rugged RoHS compliant APPLICATIONS Home and smart appliances Display time and digital combination Industrial and instrumental applications Numeric status ATTENTION Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01 )unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change Observe precautions for handling without prior notice. electrostatic discharge sensitive device SELECTION GUIDE 1 Iv (mcd) 20mA Emitting Color Part Number Lens Type (Material) Min. Typ. 200 340 Super Bright Red DE4SRD Red Diffused (GaAlAs) *40 *90 Notes: 1. Luminous intensity / luminous Flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 4 2020 Kingbright. All Rights Reserved. Spec No: DSAD1422 / 1334000040 Rev No: V.9A Date: 03/02/2020 DE4SRD ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Typ. Max. Wavelength at Peak Emission I = 20mA Super Bright Red 655 - nm F peak 1 Dominant Wavelength I = 20mA Super Bright Red 640 - nm F dom Spectral Bandwidth at 50% REL MAX Super Bright Red 20 - nm I = 20mA F Capacitance C Super Bright Red 45 - pF 2 Forward Voltage I = 20mA V Super Bright Red 1.85 2.5 V F F Reverse Current (V = 5V) I Super Bright Red - 10 A R R Notes: 1. The dominant wavelength (d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Parameter Symbol Value Unit Power Dissipation P 75 mW D Reverse Voltage V 5 V R Junction Temperature T 115 C j Operating Temperature T -40 to +85 C op Storage Temperature T -40 to +85 C stg DC Forward Current I 30 mA F 1 Peak Forward Current I 155 mA FM Electrostatic Discharge Threshold (HBM) 3000 V - 2 Lead Solder Temperature 260C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 4 2020 Kingbright. All Rights Reserved. Spec No: DSAD1422 / 1334000040 Rev No: V.9A Date: 03/02/2020