L-1533BQ/1ID Kingbright

4.7mm RIGHT ANGLE LED INDICATOR Part Number: L-1533BQ/1ID High Efficiency Red Features Description z PRE-TRIMMED LEADS FOR PC MOUNTING. The High Efficiency Red source color devices are made with z I.C. COMPATIBLE. Gallium Arsenide Phosphide on Gallium Phosphide Orange z BLACK CASE ENHANCES CONTRAST RATIO. Light Emitting Diode. z WIDE VIEWING ANGLE. z HIGH RELIABILITY - LIFE MEASURED IN YEARS. z UL RATING : 94V-0. z HOUSING MATERIAL: TYPE 66 NYLON. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAB3153 REV NO: V.7 DATE: JUL/13/2007 PAGE: 1 OF 3 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.CHEN ERP: 1102000811 Selection Guide Iv (mcd) 2 Viewing 10mA Angle 1 Part No. Dice Lens Type Min. Typ. 2 1/2 L-1533BQ/1ID High Efficiency Red (GaAsP/GaP) RED DIFFUSED 8 30 60 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions peak Peak Wavelength High Efficiency Red 627 nm IF=20mA D 1 Dominant Wavelength High Efficiency Red 625 nm IF=20mA 1/2 Spectral Line Half-width High Efficiency Red 45 nm IF=20mA C Capacitance High Efficiency Red 15 pF VF=0V f=1MHz VF 2 Forward Voltage High Efficiency Red 2 2.5 V IF=20mA IR Reverse Current High Efficiency Red 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter High Efficiency Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current 1 160 mA Reverse Voltage 5 V Operating/Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAB3153 REV NO: V.7 DATE: JUL/13/2007 PAGE: 2 OF 3 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.CHEN ERP: 1102000811