WP424HDT Kingbright

WP424HDT T-1 (3mm) Cylindrical LED Lamp DESCRIPTION PACKAGE DIMENSIONS The Bright Red source color devices are made with Gallium Phosphide Red Light Emitting Diode FEATURES Cylindrical type Low power consumption Reliable and rugged Long life - solid state reliability Available on tape and reel Halogen Free RoHS compliant APPLICATIONS Status indicator Illuminator Signage applications Decorative and entertainment lighting Commercial and residential architectural lighting Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SELECTION GUIDE 2 1 Iv (mcd) 10mA Viewing Angle Emitting Color Part Number Lens Type (Material) Min. Typ. 21/2 WP424HDT Bright Red (GaP) Red Diffused 0.2 0.6 140 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. 2021 Kingbright. All Rights Reserved. Spec No: DSAF2534 / 1101010940 Rev No: V.9B Date: 03/26/2021 Page 1 / 5 WP424HDT ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Typ. Max. Wavelength at Peak Emission I = 10mA Bright Red 700 - nm F peak 1 Dominant Wavelength I = 10mA Bright Red 635 - nm F dom Spectral Bandwidth at 50% REL MAX Bright Red 45 - nm I = 10mA F Capacitance C Bright Red 40 - pF 2 Forward Voltage I = 10mA V Bright Red 2.05 2.45 V F F Reverse Current (V = 5V) I Bright Red - 10 A R R Temperature Coefficient of peak TC Bright Red 0.14 - nm/C peak I = 10mA, -10C T 85C F Temperature Coefficient of dom TC Bright Red 0.05 - nm/C dom I = 10mA, -10C T 85C F Temperature Coefficient of V F TC Bright Red -2 - mV/C V I = 10mA, -10C T 85C F Notes: 1. The dominant wavelength (d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Parameter Symbol Value Unit Power Dissipation P 62.5 mW D Reverse Voltage V 5 V R Junction Temperature T 125 C j Operating Temperature T -40 to +85 C op Storage Temperature T -40 to +85 C stg DC Forward Current I 25 mA F 1 Peak Forward Current I 130 mA FM Electrostatic Discharge Threshold (HBM) 8000 V - 2 Thermal Resistance (Junction / Ambient) R 610 C/W th JA 2 Thermal Resistance (Junction / Solder point) R 390 C/W th JS 3 Lead Solder Temperature 260C For 3 Seconds 4 Lead Solder Temperature 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2 2. R ,R Results from mounting on PC board FR4 (pad size 16 mm per pad). th JA th JS 3. 2mm below package base. 4. 5mm below package base. 5. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. 2021 Kingbright. All Rights Reserved. Spec No: DSAF2534 / 1101010940 Rev No: V.9B Date: 03/26/2021 Page 2 / 5