CCF1N chip fuse EU features Surface mount fuse suitable for primary and secondary circuits Ceramic case provides excellent mechanical strength Suitable for flow and reflow soldering Products with lead-free terminations meet EU RoHS and China RoHS requirements dimensions and construction Dimensions inches (mm) W Type L Wt d .236.008 .098.008 .098.008 .055.008 L CCF (6.00.2) (2.50.2) (2.50.2) (1.40.2) t d End Cap d Ceramic Fuse Case Element ordering information CCF 1 N 1 T TE Rated Rated Termination Type Style Characteristic Packaging Current Voltage (UL) Material N: Normal blow Reference Nil: 125Va.c./60Vd.c. T: Sn TE: 4mm pitch rating chart or 65Va.c./65Vd.c. embossed plastic D: 125Va.c./160Vd.c. (1,000 pieces/reel) For further information on packaging, please refer to Appendix A. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 12/12/17 KOA Speer Electronics, Inc. 199 Bolivar Drive Bradford, PA 16701 USA 814-362-5536 Fax: 814-362-8883 www.koaspeer.com 263 circuit protectioncircuit protection CCF1N chip fuse applications and ratings Fusing Operating Normal Part Current Voltage Interrupting Internal R. Characteristics Temperature Melting Designation Rating Rating Capacity (m) Max. 2 2 Range l t (A , seconds) Rated Current Fusing Time CCF1N0.4 400mA 650 0.024 UL (c-UL) UL (c-UL) UL (c-UL) CCF1N0.5 500mA 510 0.030 4 hour min. AC 125V AC 125V 50A 100% 1 second max. CCF1N0.63 DC 60V DC 60V 50A 630mA 390 0.052 200% (DC 160V) (DC 160V) CCF1N0.8 800mA 250 0.125 CCF1N1 1A 90.4 0.156 CCF1N1.25 1.25A 75.9 0.220 PSE PSE PSE 4 hour min. CCF1N1.6 1.6A 59.3 0.513 AC 100V AC 100V 100A 130% 1 hour max. 160% 1 second max. CCF1N2 2A 42.9 0.814 200% CCF1N2.5 2.5A -55C 36.6 1.31 to CCF1N3.15 3.15A 26 2.37 UL (c-UL) UL (c-UL) UL (c-UL) 4 hour min. +125C AC 125V AC 125V 50A 100% 1 second max. CCF1N4 4A 20.1 3.85 DC 60V DC 60V 50A 200% CCF1N5 5A 15.3 6.5 CCF1N6.3 6.3A 11.4 10.6 CCF1N7 7A 10.6 12.8 (DC 160V) (DC 160V) CCF1N8 8A 9.5 17.0 CCF1N10 10A 7.5 27.7 12A UL (c-UL) UL (c-UL) UL (c-UL) 4 hour min. CCF1N12 4.5 73.5 AC 65V AC 65V 50A 100% 60 seconds CCF1N15 15A 3.5 125.5 DC 65V DC 65V 50A 200% max. High rated voltage products (DC 160V: 400mA to 10A) are available. Please contact KOA Speer. environmental applications Derating Curve Fusing Characteristics 1.5 1.4 10 1.3 1.2 1 1.1 1.0 .1 0.9 0.8 .01 0.7 0.6 0.5 .001 -55 -35 -15 5 25 45 65 85 105 125 0.1 1 10 100 Ambient Temperature Fusing Current (C) (A) Performance Characteristics Requirement R% Parameter Limit Typical Test Method Within specified time. Fusing Characteristics Fusing time measured under rated current x 160% and 200% No restrike Max. Temp. Rise 140C Surface temperature should be measured by rated current x 115% Surface Temperature Rise Max. Temp. Rise 75C Surface temperature should be measured by rated current x 100% Bending Test No mechanical damages Distance between holding points 90mm, bent by 3mm at rate of 1mm/s Resistance to Soldering Heat 10% 3% 260C 5C, 10 seconds 0.5 seconds Solderability 95% coverage min. 235C 5C, 3 seconds 0.5 seconds Load Life 10% 5% 70C 2C, 1000 hours, rated current x 70%, 1.5 hr ON, 0.5 hr OFF cycle 40C 2C, 90 - 95% RH, 1000 hours, rated current x 70%, Load Life Moisture 10% 5% 1.5 hr ON, 0.5 hr OFF cycle Rapid Change of Temperature 10% 5% -55C (30 minutes), +125C (30 minutes), 100 cycles Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 11/06/18 264 KOA Speer Electronics, Inc. 199 Bolivar Drive Bradford, PA 16701 USA 814-362-5536 Fax: 814-362-8883 www.koaspeer.com Derating Coefficient Number Fusing Time (Sec.) 0.4 0.5 0.63 0.8 1 1.25 1.6 2 2.5 3.15 4 5 6.3 7 8 10 12 15