resistors CN concave termination with square corners resistor array EU features Manufactured to type RK73 standards Less board space than individual chips Isolated resistor elements Products with lead-free terminations meet EU RoHS requirements. EU RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass. AEC-Q200 Qualified: CN1J4 only dimensions and construction L Dimensions inches (mm) Size a p Code L W C d t a (top) a (bot.) b p (ref.) b W 1E2 .039.004 .014.004 (0402x2) (1.0 0.1) (0.35 0.1) .039.004 .008.004 .010.004 .012.004 .012.006 .003.002 .020 C t (1.0 0.1) (0.2 0.1) (0.25 0.1) (0.3 0.1) (0.3 0.1) (0.07 0.05) (0.5) d 1E4 .079.004 .018.004 a (0402x4) (2.0 0.1) (0.45 0.1) Protective Resistive Coating Film 1J2 .063.008 Electrode Ceramic Inner (0603x2) (1.6 0.2) Substrate Electrode 1J4 .126.008 .063.008 .012.008 .016.004 .020.004 .016.006 .031 (0603x4) (3.2 0.2) (1.6 0.2) (0.3 0.2) (0.4 0.1) (0.5 0.1) (0.4 0.15) (0.8) 1J8 .252.008 (0603x8) (6.4 0.2) 2A2 0.1.008 (0805x2) (2.54 0.2) EOL 2A4 0.2.008 .079.008 .016.008 .024.004 .006.004 (0805x4) (5.08 0.2) (2.0 0.2) (0.4 0.2) (0.6 0.1) (0.15 0.1) 2A8 0.4.008 (0805x8) (10.16 0.2) .022.004 .031.004 .030.006 .050 (0.55 0.1) (0.8 0.1) (0.75 0.15) (1.27) 2B2 0.1.008 (1206x2) (2.54 0.2) 2B4 0.2.008 .126.008 .020.012 (1206x4) (5.08 0.2) (3.2 0.2) (0.5 0.3) 2B8 0.4.008 (1206x8) (10.16 0.2) ordering information CN 1J 4 T TD 101 J Termination Nominal Type Size Elements Packaging Tolerance Material Resistance 1E 2 T: Sn TE: 7 embossed plastic 2 significant F: 1% 1J figures + 1 4 (1J ~ 2B: Other TD: 7 paper tape G:2% multiplier for 2A termination styles 8 TED: 10 embossed plastic J: 5% 2 & 5% may be available, 2B TDD: 10 paper tape please contact 3 significant factory for options) figures + 1 For further information on packaging, multiplier please refer to Appendix A. for 1% Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 11/14/17 80 KOA Speer Electronics, Inc. 199 Bolivar Drive Bradford, PA 16701 USA 814-362-5536 Fax: 814-362-8883 www.koaspeer.com CN concave termination with square corners resistor array circuit schematic Vcc Circuit Board Application CN1E2, CN1J2, CN1E4, CN1J4, CN1J8, CN2A8, CN2B8 CN2A2, CN2B2 CN2A4, CN2B4 R1 R2 R1 R2 R3 R4 R1 R2 R3 R4 R5 R6 R7 R8 IC IC R1 = R2 R1 = R2 = R3 = R4 R1 = R2 = R3 = R4 = R5 = R6 = R7 = R8 applications and ratings Rated Absolute Maximum Power Rating Rated T.C.R. (ppm/C) Max. Resistance Range () Part Terminal Maximum Overload 70C Ambient Designation Part Working Voltage J:5%, E-24, E-96 E-24 E-24 (Per Element) Temp. F:1% Temp. Voltage (5 Secs. Max.) G:2% (F:1%) (G:2%) (J:5%) CN1E2 1/16W (.063W) 10 - 100k 25V 50V CN1E4 CN1J2 100: 10 - 1M CN1J4 1/16W (.063W) R10 200: 10 - 1M 1 - 1M 50V 100V CN1J8 R10 200: +70C CN2A2 R10 10 - 1M 1/10W (.100W) 100V 200V CN2A4 +125C 10 - 1M 400: CN2A8 R<10 10 - 1M 200: CN2B2 10 - 1M R10 CN2B4 1/8W (.125W) 200V 400V CN2B8 * Note that network resistors generate higher heat rather than single flat chip resistor under rated power output. Operating Temperature Range: -55C to +125C (CN1E), -55C to +155C If any questions should arise whether to use the Rated Ambient Temperature or the Rated Terminal Part Temperature, please give priority to the Rated Terminal Part Temperature. Prior to use and for more details refer to Introduction of the derating curves on the terminal part temperature in the beginning of the catalog. environmental applications Derating Curve 100 100 CN1E2 CN1J2 CN1J2 EOL CN1E4 CN1J4 CN1J4 80 CN1J8 80 CN1J8 CN2A2 CN2A2 CN2A4 CN2A4 CN2A8 CN2A8 60 CN2B2 60 CN2B2 CN2B4 CN2B4 CN2B8 CN2B8 40 40 20 20 0 0 -60 -40 -20 0 20 40 60 80 100 120 140 -60 -40 -20 0 20 40 60 80 100 120 140 -55 70 125 155 -55 70 125 155 Ambient Temperature Terminal Part Temperature (C) (C) For resistors operated at an ambient temperature of 70C or above, a For resistors operated at a terminal temperature of described for each power rating shall be derated in accordance with the above derating curve. size or above, a power rating shall be derated in accordance with the above derating curve. Performance Characteristics Requirement R % Parameter Limit Typical Test Method Within specified Resistance 25C tolerance Within specified T.C.R. +25C/-55C, +25C/+125C T.C.R. Overload (Short time) 2.0% 0.5% Rated voltage x 2.5 for 5 seconds Resistance to Solder Heat 1.0% 0.25% 260C 5C, 10 seconds 1 second Rapid Change of Temperature 1.0% 0.5% -55C (30 minutes), +125C (30 minutes), 5 cycles Moisture Resistance 5.0% 1.0% 40C 2C, 90 - 95% RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle Endurance at 70C 5.0% 0.5% 70C 2C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle 0.2%: CN1E2, CN1E2, CN1E4: +125C, 1000 hours CN1E4 High Temperature Exposure 1.0% CN1J2, CN1J4J, CN1J8, CN2A2, CN2A4, CN2A8, CN2B2, CN2B4, CN2B8: 0.3%: Other +155C, 1000 hours Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 3/28/19 KOA Speer Electronics, Inc. 199 Bolivar Drive Bradford, PA 16701 USA 814-362-5536 Fax: 814-362-8883 www.koaspeer.com 81 % Rated Power % Rated Power resistors