current sense , , SLW07 SLW1 SLN3, SLN5 surface mount molded current sense resistors EU features Surface mount type Flameproof UL94V0 molded polymer case Excellent dimension accuracy, mountability and shock resistance Products with lead-free terminations meet EU RoHS requirements. EU RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass. AEC-Q200 Qualified dimensions and construction L Dimensions inches (mm) Size Code L W t a b c W b SLW07 .197.012 .098.008 .067.008 .079.008 .047.008 .035.012 (2010) (5.00.3) (2.50.2) (1.70.2) (2.00.2) (0.90.2) (1.20.3) t Electrode .248.012 .122.008 .075.008 .094.008 .047.008 .047.012 SLW1 (6.30.3) (3.10.2) (1.90.2) (2.40.2) (1.20.2) (1.20.3) (2512) a c Molded Resistive c SLN3 .453.012 .276.008 .094.008 .217.008 .063.008 .100.016 Resin Element (4527) (11.50.3) (7.00.2) (2.40.2) (5.50.2) (1.60.2) (2.550.4) SLN5 .453.012 .276.008 .098.008 .217.008 .075.008 .100.016 (4527) (11.50.3) (7.00.2) (2.50.2) (5.50.2) (1.90.2) (2.550.4) ordering information SL 1 T TE 10L0 F 75 Size & Power Termination Nominal T.C.R. Type Packaging Tolerance -4 Ratings Material Resistance (x10 /K) SL W07: 1W T: Sn TE: Embossed plastic 0.5%, 1%: 4 digits D: 0.5% Nil: 0-150 0-200 SLN W1: 1.5W TED: 10 embossed plastic 5%: 3 digits F: 1% 75 (SLN3/SLN5) (SLN5 only) 3: 3W All values less than J: 5% 100 For further information on 0.1 (100m) are 5: 7W 110 packaging please refer to expressed in mW 180 Appendix A with L as decimal 50: 50 (SLW1) Ex: 2m = 2L00 75: 75 (SLW1) applications and ratings Resistance Range ()* T.C.R. Rated Operating Part Power (ppm/C) Terminal Part Temperature D: 0.5% F: 1% J: 5% Designation Rating Max. Temperature Range E24, E96*** E24, E96*** E24 0~200: R=<10m SLW07 5m - 100m 1W 125C 0~150: R=>11m 180: R=<13m 100: R=>15m 10m - 100m 5m - 100m SLW1 1.5W 120C 75: 20m=<R=<100m -55C to +180C 50: 34.8m=<R=<100m 110: R<10m SLN3 5m - 110m 3W 105C 75: R=>10m 110: R<10m SLN5 70C (120C)** -65C to +180C 7W (5W)** 3m - 200m 75: R=>10m * 5m, 6m, 7m, 8m, 9m also available inside resistance range ** In case the rated terminal part temperature of 120C, the rated power shall be 5W *** SLW07 offers only E24 series Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 12/11/19 116 KOA Speer Electronics, Inc. 199 Bolivar Drive Bradford, PA 16701 USA 814-362-5536 Fax: 814-362-8883 www.koaspeer.com, , SLW07 SLW1 SLN3, SLN5 surface mount molded current sense resistors environmental applications Derating Curve 100 SLW07, SLW1, SLN3 SLW1 80 SLN5 SLW07 SLN5 SLN3 60 For resistors operated at a terminal part temperature of described for each size 40 or above, a power rating shall be derated in accordance with the derating curve. 20 Please refer to Introduction of the derating curve based on the terminal part temperature in the beginning of our catalog before use. 0 -80 -40 -20 0 20 40 60 80 100 120 140 160 180 -60 -65 -55 70 105 125 Terminal Part Temperature (C) One-Pulse Limiting Electric Power SLW07 SLW1, SLN3, SLN5 100,000 1,000,000 The maximum applicable voltage is equal to the max. overload voltage. 100,000 10,000 Please ask us about the resistance 10,000 characteristic of continuous applied pulse. 1,000 1,000 The pulse endurance values are not 100 assured values, so be sure to check the 100 SLN3/ SLN5 products on actual equipment when you 10 10 SLW1 use them. 1 1 .001 .01 .1 1 10 100 .001 .01 .1 1 10 100 Pulse Duration Pulse Duration (ms) (ms) Thermal Resistance The temperature of the resistor will Terminal Part Temperature TH T Hs Type Resistance ( ) Rth (C/W) TH High increase the same T from the 5m 26 TM Medium ts T standard terminal part temperature 22m 48 TL Low TM T Hs SLW07 regardlless of the ambient temperature 100m 78 T TH when the same power is applied. This 5m 16 TL T Hs SLW1 20m 39 is because there is hardly any heat T T 100m 59 M dissipation from the resistor surface 5m 11 to the ambient air. SLN3 11m 19 T L 5m 11 11m 19 SLN5 Low High 200m 15 Terminal Part Temperature Rth=(Hs-ts)/Power Regarding the temperature rise, the value of the temperature varies per conditions and board for use since the temperature is measured under our measuring conditions. Please refer to us before use. Performance Characteristics Requirement R % Parameter Limit Typical Test Method Within specified Resistance 25C tolerance Within specified T.C.R. +25C/+125C T.C.R. 1%: SLW07,SLW1 1%: SLW07,SLW1 Overload SLW07: 3W for 5 seconds, SLW1: 5W for 5 seconds, SLW1 (T.C.R: 50/75): 0.5%: SLN3 0.25%: SLN3 (Short time) 4W for 5 seconds, SLN3: 10W for 5 seconds, SLN5: 15W for 5 seconds 2%: SLN5 0.5%: SLN5 1%: SLW07, 1%: SLW07, Resistance 260C 5C, 10 1 second SLW1 SLW1 to Solder Heat 0.5%: SLN3, SLN5 0.5%: SLN3, SLN5 260C 5C, 10~12 seconds 1%: SLW07, 0.5%: SLW07, -55C (30 minutes), +150C (30 minutes), 100 cycles Rapid Change SLW1 SLW1 of Temperature 0.5%: SLN3, SLN5 0.3%: SLN3, SLN5 -55C (15 minutes), +150C (15 minutes), 1000 cycles 2%: SLW07, 1%: SLW07, Moisture 40C 2C, 90%~95%RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle SLW1 SLW1 Resistance 0.5%: 0.35%: SLN3: 85C 2C, 85% RH, 1000 hours, 0.3W SLN3, SLN5 SLN3, SLN5 SLN5: 85C 2C, 85% RH, 1000 hours, 0.7W Endurance of Rated Terminal 1% Terminal part temperature: 125C (SLW07), 120 C (SLW1, SLN5: 5W), 105C (SLN3), 2% Part Temperature 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle, 70C (SLN5: 7W) 1.2%: SLN5 Low Temperature Exposure 0.5% 0.25% SLW07, SLW1: -55C, 1 hour SLN3, SLN5: -65C, 24 hours Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 12/11/19 KOA Speer Electronics, Inc. 199 Bolivar Drive Bradford, PA 16701 USA 814-362-5536 Fax: 814-362-8883 www.koaspeer.com 117 % Rated Power One-Pulse Limiting Electric Power (W) Temperature One-Pulse Limiting Electric Power (W) current sense