S1A/B - S1M/B
Green
1.0A SURFACE MOUNT GLASS PASSIVATED RECTIFIER
Features Mechanical Data
Glass Passivated Die Construction for High Reliability Case: SMA/SMB
Surge Overload Rating to 30A Peak Case Material: Molded Plastic. UL Flammability Classification
Rating 94V-0
Ideally Suited for Automated Assembly
Moisture Sensitivity: Level 1 per J-STD-020
Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
Terminals: Lead Free Plating (Matte Tin Finish). Solderable per
Halogen and Antimony Free. Green Device (Note 3)
MIL-STD-202, Method 208
Polarity: Cathode Band or Cathode Notch
Weight: SMA - 0.064 grams (approximate)
SMB - 0.093 grams (approximate)
Top View Bottom View
Ordering Information (Note 4)
Part Number Qualification Case Packaging
S1x-13-F Commercial SMA 5000/Tape & Reel
S1xB-13-F Commercial SMB 3000/Tape & Reel
* x = Device type, e.g. S1A-13-F (SMA package); S1AB-13-F (SMB package).
Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
2. See
S1A/B - S1M/B
Maximum Ratings (@T = +25C, unless otherwise specified.)
A
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
S1 S1 S1 S1 S1 S1 S1
Characteristic Symbol Unit
A/AB B/BB D/DB G/GB J/JB K/KB M/MB
Peak Repetitive Reverse Voltage V
RRM
Working Peak Reverse Voltage V 50 100 200 400 600 800 1000 V
RWM
DC Blocking Voltage
V
R
RMS Reverse Voltage V 35 70 140 280 420 560 700 V
R(RMS)
Average Rectified Output Current @ T = +100C I 1.0 A
T O
Non-Repetitive Peak Forward Surge Current
30 A
I
FSM
8.3ms Single half sine-wave superimposed on rated load
Thermal Characteristics
Characteristic Symbol Value Unit
Typical Thermal Resistance, Junction to Terminal (Note 5) 30 C/W
R
JT
Operating and Storage Temperature Range -65 to +150
T T C
J, STG
Electrical Characteristics (@T = +25C, unless otherwise specified.)
A
Characteristic Symbol Min Typ Max Unit
1.1 V
Forward Voltage @ I = 1.0A V
F FM
Peak Reverse Leakage Current @ T = +25C 5.0
A
A
I
RM
100
at Rated DC Blocking Voltage @ T = +125C
A
Reverse Recovery Time (Note 6) t 1.8 3.0 s
rr
Typical Total Capacitance (Note 7) C 10 pF
T
2
Notes: 5. Thermal resistance junction to terminal, unit mounted on PC board with 5.0 mm (0.013 mm thick) copper pads as heat sink.
6. Measured with I = 0.5A, I = 1.0A, I = 0.25A.
F R RR
7. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
1.0
10
Note 5
0.8
1.0
0.6
0.4
0.1
0.2
Resistive or
inductive load
0 0.01
010.4 0.8 1.2.6
40 60 80 100 120 140 160 180
V , INSTANTANEOUS FORWARD VOLTAGE (V)
T , TERMINAL TEMPERATURE (C)
F
T
Fig. 2 Typical Forward Characteristics
Fig. 1 Forward Current Derating Curve
2 of 5 March 2014
S1A/B - S1M/B
Diodes Incorporated
www.diodes.com
Document number: DS16003 Rev. 23 - 2
I, AVERAGE FORWARD CURRENT (A)
F
I , INSTANTANEOUS FORWARD CURRENT (A)
F