02014W104KAT2A Kyocera AVX

Technical Data Multi-layer Ceramic Chip Capacitors Test Item 02014W104KAT Test condition Electrical Characteristics No Item Test or measurment condition QTY 1KHz 1 Capacitance 50 1Vrms 1KHz 2 Dissipation factor 50 1Vrms 3 Insulation resistance Supply Rated Voltage for 1 min. 20 4 Breakdown voltage Supply Current 50mA max. in air. 20 5 Dimensions Digimatic Caliper 20 6 Temperature Characteristics -55deg to 105deg 1KHz , 0.5Vrms 5 1KHz 7 Aging 20 1Vrms 8 Impedance/ESR 1MHz to 1.0GHz 5 Mechanical characteristics No Item Test Condition QTY 1 Bend Strength Glass epoxy board (JIS C 5101) 1.0mm/Sec 20 2 End Termination Adherence Refer to JIS C 5101 20 Environmental Test No Item Test Condition QTY 1 High Temperature and Load Test 105deg : Supply 1.3Rated Voltage 50 2 High Humidity Test 40deg, 90 to 95%RH:Supply Rated Voltage 50 -55deg(30min) to RT(3min) to +105deg(30min) 3 Temperature Cycling Test 50 5 Cycles Multi-layer Ceramic Chip CapacitorsElectrical Characteristics 02014W104KAT (1) Capacitance (2) Dissipation factor 120 10.0 8.0 110 6.0 100 4.0 90 2.0 80 0.0 70 0 5 10 15 20 0 5 10 15 20 n n AVG : 99.04 STD : 2.35 AVG : 4.46 STD : 0.14 (3) Insulation resistance (4) Breakdown voltage 8.0 500 7.0 400 6.0 300 5.0 200 4.0 100 3.0 0 0 5 10 15 20 0 5 10 15 20 n n AVG : 113 STD : 9 AVG : 4.33 STD : 0.03 (5) Dimensions 0.5 0.5 0.8 0.4 0.4 0.7 0.3 0.3 0.6 0.5 0.2 0.2 0.4 0.1 0.1 010 20 010 20 010 20 n n n AVG : 0.604 STD : 0.008 AVG : 0.305 STD : 0.005 AVG : 0.3 STD : 0.005 L (mm) Log IR (Mohm) Cap (nF) W (mm) BDV (V) D.F. (%) T (mm)