069176702201000 Kyocera AVX

Single IDC Contact 22-28 AWG: WTB INTERINTER CONNECTCONNECT 9176-400 The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB ranging from 14 AWG to 28 AWG. This industry proven contact system has been tested to automotive levels of shock, vibration, and temperature cycling to prove their reliability and robustness. This new single contact was developed as a standalone component to enhance the application uses with the IDC technology. The simplicity of inserting a wire into an SMT contact with a small tool or optional retention / termination cap allows a wide range of devices to be connected to the PCB without soldering. In SSL applications specifically, these contacts are used to bring power and signal onto the PCB or are used to daisy chain multiple boards together in a long string. While the IDC contact provides a gas-tight connection to conductor of the wire, the optional cap provides a positive strain relief even in the harshest conditions. In case of repair, the wires can be removed and replace up to three times. The single 9176-400 series contact and cap accepts 22 AWG to 28 AWG wires with an insulation diameter ranging from 1.0mm to 1.5mm. These dual beam contacts support a 6 amp current rating with a large SMT solder base to provide maximum stability on the PCB. The optional locking strain relief cap acts as the termination tool for severe vibration applications. APPLICATIONS FEATURES AND BENEFITS Connecting discrete wire components IDC contact is supplied in T&R pockets for standard SMT placement directly to the PCB IDC contact provides a gas-tight connection to the PCB for long term reliability Bringing power and signals onto a PCB Optional termination cap provides additional strain relief for severe environments Daisy chaining PCBs together to create Tested to automotive levels on shock, vibration and temperature cycling for reliability a continuous string of boards Reduced total applied cost versus solder or crimp processes Application notes: refer to 201-01-124 Individual contacts can be located anywhere on the PCB based on specific application ELECTRICAL ENVIRONMENTAL MECHANICAL Current Rating: 6 Amps/Contact Operating Temperature: Insulator Material: Nylon 46: UL94V0 Voltage Rating: Dependant on -40C to +125C Contact Material: Phosphor Bronze component proximity Plating: Tin over Nickel Durability: 3 Cycles HOW TO ORDER CONTACT OPTIONS 001 4XX 006 70 9176 Number of Ways Wire Gauge Size Plating Prefix Series Option 70 = Contact No of Code Accepted Code Details 006 = Pure Tin Ways Wire Gauge all over 001 1 Page 36 422 22 Gauge Solid or Stranded 432 24 Gauge Solid or Stranded 442 26 Gauge Solid or Stranded 443 28 Gauge Solid or Stranded HOW TO ORDER CAP OPTIONS 001 415 X00 60 9176 Number of Ways Wire Gauge Size Insulator Color Prefix Series 60 = Cap No of Code Wire Code Color Application Code Details Ways Insulation 000 Black Industrial 001 1 Page 40 415 0.75-1.5 100 White Lighting CONNECTOR/TOOLING PART NUMBER MATRIX SERIES 9176-400 IDC HAND INSERTION TOOLING* ACCESSORY CAPS Wire Plastic Metal Cap Application AWG Positions Part Number White Black Insulation (medium volume) (high volume) Tool 22 1.0 - 1.5 1p 709176001422006 069176702201000 069176702101000 069176702301000 609176001415100 609176001415000 24 1.0 - 1.5 1p 709176001432006 069176702201000 069176702101000 069176702301000 609176001415100 609176001415000 26 0.7 - 1.0 1p 709176001442006 069176702201000 069176702101000 069176702301000 609176001415100 609176001415000 28 0.7 - 1.0 1p 709176001443006 069176702201000 069176702101000 069176702301000 609176001415100 609176001415000 * Hand Insertion Tooling and Cap Application - Universal Hand Tool 067000773001000 Consult Application Notes 201-01-124 Certification: UL File E90723 030818 35Single IDC Contact 22-28 AWG: WTB INTERINTER CONNECTCONNECT 9176-400 CONTACT DETAILS Code Accepted A Wire Gauge 422 22AWG Solid or Stranded 0.47 432 24AWG Solid or Stranded 0.37 442 26AWG Solid or Stranded 0.28 443 28AWG Solid or Stranded 0.20 NOTES: 1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION. 2. CONTACT MATERIAL: PHOSPHOR BRONZE. 3. CONTACT PLATING: PURE TIN. 4. CONNECTOR DESIGNED TO ACCEPT BETWEEN 22AWG AND 28AWG SOLID AND STRANDED WIRE, SEE TABLE. 5. ALL DIMENSIONS 0.20 UNLESS TOLERANCED. 6. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-126 AND APPLICATION NOTES 201-01-124. 7. SMT PCB LAYOUT, REFER TO PAGE 37. 8. PACKING IN TAPE AND REEL, QUANTITY 2000 PER REEL. 9. WHEN REQUIRED, MATCHING CAP DETAILS ON DRAWING 60-9176-001-4XX-X06S. 10. ASSEMBLY TOOLING ON PAGE 39 FOR WIRE INTO CONTACT AND PAGE 38 FOR CAP. 11. UL REFERENCE E90723, THIS UL REFERENCE ALSO APPLIES WHEN COMBINED WITH AVX SPECIFIED OPTIONAL CAP. PACKING DETAILS REEL QTY 2 000 LEADER 480MM TRAILER 120MM 030818 36