ATC 550Z SERIES UBC CAP ACITORS ATC 550Z Series UBC Ultra-Broadband Capacitor Features: EIA 0201 Case Size Capacitance: 10 nF min. Operating Frequency: 160 KHz (-3 dB roll-off) to 40+ GHz* Insertion Loss: < 0.4 dB typical Orientation Insensitive One Piece Construction Voltage Rating: 10 WVDC** Advantages: Applications: RoHS Compliant Terminations Ultra-Broadband Optoelectronics/ Gold Terminations Available Performance High Speed Data ATCs new 550Z Ultra-Broadband Capacitor is manu- Ultra-Low T ransimpedance Insertion Loss factured with highest quality materials to provide reli- amplifiers Flat Frequency Response able and repeatable Ultra-Broadband performance ROSA/TOSA Excellent Return Loss from 160 KHz through 40+ GHz. It exhibits ultra-low SONET insertion loss, flat frequency response and excellent Unit-to-Unit Performance Broadband Test Repeatability return loss, and is ideal for D.C. Blocking, Coupling, Equipment Rugged Bypassing and Feedback applications requiring Ultra- Broadband Microwave/ Ceramic Construction millimeter-wave Broadband performance. * 25 C, no bias applied R eceive and Transmit Optical The 550Z is a one-piece orientation-insensitive 0201 SMT Sub-Assembly ** Operating temperature package, fully compatible with high speed automated Synchronous Optical Network dependent pick-and-place manufacturing. It is designed to meet the most stringent requirements of Ultra-Broadband applications. ATC 550Z Series Insertion Loss (S21) ATC 550Z Series Return Loss (S11) ATC 550Z Data Sheet Test Condition Description All testing performed on 10-mil-thick Rogers RO3006 microstrip board, with the device under test subtending a 10 mil gap in a 13.4-mil-wide center trace (nominal 50-ohm characteristic impedance). ATC 001-1086 Rev. G 12/15 ATC 550Z SERIES UBC CAP ACITORS Electrical Specifications: Mechanical Dimensions Capacitance: 10 nF min. Rated Voltages: 6.3 WVDC from -55C to +125C 0.012 in. 0.001 in. (0.3 mm 0.03 mm) 10 WVDC from -55C to +85C 0.023 in. 0.001 in. Dielectric Withstanding V oltage (DWV): (0.58 mm 0.03 mm) 250% of rated WVDC for 5 secs. Operating T emperature Range: -55C to +125C 0.004 in. 0.002 in. T emperature Coefficient of Capacitance (TCC): (0.102 mm 0.051 mm) 0.012 in. 0.001 in. 22% (-55C to +125C) (0.3 mm 0.03 mm) 15% (-55C to +85C) Maximum DF: 5% 1KHz Insulation Resistance: 8 10 min. +25C rated WVDC 7 10 min. +125C rated WVDC ATC PART NUMBER CODE ATC 550 Z 103 P T T Series Case Size: (0201) Tape and Reel (standard)* Capacitance Code: Termination Code First 2 significant digits for capacitance T = Tin Plated over Nickel Barrier R=Decimal Point (Standard) CA = Gold Plated over Nickel Barrier Capacitance Tolerance P = +100%, -0% *500, 1000, 4000 pieces on 3 reel. The above part number refers to a 550 Series (case size Z) 10 nF capacitor, P tolerance, with T termination (Tin Plated over Nickel Barrier), tape and reel packaging. For other terminations please consult factory. ATC accepts orders for our parts using designations with or without the For additional information and catalogs contact your ATC ATC prefix. Both methods of defining the part number are equivalent, i.e., representative or call direct at (+1-631) 622-4700. part numbers referenced with the ATC prefix are interchangeable to parts referenced without the ATC prefix. Customers are free to use either in Consult factory for additional performance data. specifying or procuring parts from American Technical Ceramics. Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document 001-992 Rev. A 10/03). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC s website at www.atceramics.com/productfinder/default.asp. Click on the link for Terms and Conditions of Sale. ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product line without prior notice. 2009 American Technical Ceramics Corp. All Rights Reserved. ATC 001-1086 Rev. G 12/15